Application (Record)Taking pictures with your own settings[Program AE] Mode- 58 - VQT4J11You can take pictures with your own settings by changing the color tone, ISO Sensitivityand other settings under the [Rec] menu and other menus.• About recording modes (→48)● If aperture and shutter speed are shown in red, youdo not have appropriate exposure. You should eitheruse the flash, change [Sensitivity] settings or set[Min. Shtr Speed] to a slower speed.Aperture value Shutter speedProgram ShiftThe function for maintaining the same exposure (brightness) while changing the shutterspeed and aperture value combination is called “Program Shift”. You can use “ProgramShift” to take pictures by adjusting the shutter speed and aperture value even in [ProgramAE] Mode.Press the shutter button halfwaySelect a combination of shutterspeed and aperture valueProgram Shift indicator ( )Exposure meter• To cancel Program Shift→ Rotate the rear dial until the ProgramShift indicator goes off.● When the camera is turned off, Program Shift is canceled.● Program Shift may not function for some subject brightness levels.About the exposure meterShutter speed(Automatic adjustment)Aperture value(Automatic adjustment)
