Panasonic DMC-TZ2 Operating Instructions Manual

Also see for Lumix DMC-TZ2: Operating instructions Instrucciones de funcionamiento Operating instructions Operating instructions Operating instructions

76 VQT1B74 VQT1B74 77Connectingwith otherdevices 2 Printing You can connect directly to a PictBridge-compatible printer for printing.Preparations: Ensure that you have a sufficiently-charged battery, or an AC adaptor(DMW-AC5E, optional).Remove memory card to use pictures in built-in memory.Adjust settings on your printer (print quality, etc) as required.Do not use any other USB connection cables except the supplied one.Do not disconnect the USB cable when the cable disconnection icon is displayed(may not be displayed with some printers).Turn off power and disconnect USB cable before inserting or removing memory cards.If you have connected the camera without setting it to , remove the USB cable,and set the camera to before reconnecting. (Power may need to be reset on someprinters.)If you change to a different mode after connecting, an error message will be displayed.Set the mode dial back to , cancel any printing, and disconnect the USB cable.To print clipboard pictures, first copy (P.60) to the memory card.If the battery display flashes red, cancel printing and disconnect the USB cable(reconnect again after charging battery).An orange displayed during printing indicates an error message. Check the printer.Print may be divided into different stints if printing several pictures.(Remaining sheets display may differ from set number.)USB cable(always use cable supplied)Turn on power of both camera and printerSet toConnect camera to printerOperate camera to print pictures (see right)Check socket direction and insert straight in.(Damage to socket shape can lead to faultyoperation.)If using AC adaptor,turn off camerapower beforeplugging in orremoving.Hold hereAlign marksand insertPrinting single picturesSelect picture to print1/3100-0001MULTI PRINT PRINTSELECTPictBridgePLEASE SELECTTHE PICTURE TO PRINTSelect ‘PRINT START’SETOFFSINGLE SELECTSELECTCANCELPRINT WITH DATENUM. OF PRINTSPRINT STARTPAPER SIZEPAGE LAYOUT1To cancel print Press ‘MENU/SET’Print settings → (P.78)Disconnect USB cable after printing.Printing multiple picturesSelect ‘MULTI PRINT’1/3100-0001MULTI PRINT PRINTSELECTPictBridgePLEASE SELECTTHE PICTURE TO PRINTSelect itemPictBridgeDPOF PICTUREMULTI SELECTSELECT ALLFAVORITESETSELECT CANCELSee below for detailsSelect ‘PRINT START’PRINT WITH DATENUM. OF PRINTSPRINT STARTPAPER SIZEPAGE LAYOUTOFF1SETSELECTCANCELMULTI SELECTSelect ‘YES’ if print confirmationscreen is displayed.Multiple picture printing itemsItem DetailsMULTI SELECTScroll between pictures with ◄►, select pictures with ▼ (displayed) to print. Press ▼ again to release selection.Press 'MENU/SET' when selection is complete.SELECT ALL Print all pictures.DPOF PICTURE Print pictures selected in ‘DPOF PRINT’. (P.68)FAVORITE Print pictures selected as ‘FAVORITE’.(Displayed if ‘FAVORITE’ (P.65) set)