Wi-FiEasily connect to a smartphone (NFC)VQT4T08- 203 -Connecting easily to a smartphone for remote controlIf you use the NFC function, the operation for “Connecting to smartphone/tablet” becomesquicker (→198)Start “Image App” on the smartphonePlace your smartphone to the side of this unitPlace the NFC area of your smartphone over the part of this unit as shown in thefigure below.• This function can be used even when the camera is turned off.• Do not bump your smartphone strongly against this unit.(The smartphone or this unit may get scratched)• For information on how to use NFC compatible devices, please contact the devicemanufacturer.• If there is no immediate reaction, slightly move the position where the phone wasplaced.Place over this area(within 5 mm (0.20 inch))Press to select [Yes] and press [MENU/SET]Place your smartphone over this area of the unit again• When the connection is complete, live images captured by the camera will bedisplayed on your smartphone.• Connected smartphones are registered to this unit. From the next time and on,you can connect by performing steps and .● You can register up to 20 smartphones. If the number of registered smartphonesexceeds 20, registrations will be deleted starting from the smartphone touched first.● Cannot connect while supplying power with the AC adaptor (supplied) connected.(Pictures can be transferred. (→204))
