Panasonic DMP-B15 Operating Instructions Manual

Also see for DMP-B15 - Portable Blu-ray Player: Specifications Operating instructions Operating instructions Operating instructions

Panasonic DMP-B15 Operating Instructions Manual Manual pdf 11 page image

Getting startedRQT9334(ENG)11Preparing the PowerSupplyThe unit is in the standby condition (the [Í] indicator lights)when the AC power supply cord is connected. The primarycircuit is always “live” as long as the AC adaptor is connectedto an electrical outlet.≥When connecting the AC adaptor, use the unit after setting itvertically. Placing the unit with the stand closed(e.g.:D 10, 3 in “Installation of the unit”) may cause damageto or malfunction with the AC adaptor.To conserve powerThis unit consumes 0.5 W (Approximately 5 W when QuickStart is set to “On”) of power even when turned off. When theunit is not going to be used for a long time, disconnect the ACpower supply cord from the household AC outlet.This unit can be used in places without an AC outlet, such asoutdoors, by attaching the included battery pack.≥The battery is not charged at the time of purchase. Chargebefore initial use.≥The battery is designed only for use with this unit. It cannot beused with other equipment.∫Attaching the battery packTurn the unit off before attaching or detaching the battery pack.≥Attach the battery after closing with the LCD screen facinginwards and the stand open.∫Detaching the battery packWhen not using for long periods of time≥Detach the battery pack (D above).(Even when the unit is turned off, there is a small amount ofvoltage running through the unit, and this may result in amalfunction.)≥Recharge the battery for re-use.∫Recharging the battery packAttach the battery pack and connect the ACadaptor (> left).≥The [CHARGE] indicator lights while charging the battery, andthe [CHARGE] indicator turns off when battery charging isfinished.∫Approximate recharging and play times (Hours)*1 When the unit is off [at 20 oC (68 oF)]*2 At room temperature using headphones [at 20 oC (68 oF)]≥The times indicated on the above may differ depending on use.≥To change the LCD brightness (> 13, “Adjusting the pictureson the LCD screen”).∫Checking the remaining battery chargeWhen the unit is on (> 12, “Turning on/off the unit”) andpowered by the battery packPress [SUB MENU] to check on the LCD(displays for a few seconds).Using the unit connected to theAC adaptorUsing the battery packAC adaptor(included)To a householdAC outletAC power supply cord(included)12 3RELEASEDETACH ATTACHRELEASEDETACH ATTACHBottom side of this unitBattery pack(included)Clicks into place.Check to make sure it is securely fastened.2 Slide in to the right.1 Bring in from theleft, aligning thegrooves.Recharging*1Play* 2LCD brightness levelj5 0 +57 2.5 2.25 2RELEASEDETACH ATTACHBottom side of this unit2 Slide.1 Press and hold.[CHARGE] indicator(Yellow light)(screen)(flashing)RechargeAppears automatically when there is onlya few minutes of charge remaining.