Panasonic DMP-B15 Operating Instructions Manual

Also see for DMP-B15 - Portable Blu-ray Player: Operating instructions Specifications Operating instructions Operating instructions

Panasonic DMP-B15 Operating Instructions Manual Manual pdf 11 page image

11RQT9338 Getting startedPreparing the powerSupplyThe unit is in the standby condition (the [Í] indicator lights)when the AC mains lead is connected. The primary circuit isalways “live” as long as the AC adaptor is connected to anelectrical outlet.≥When connecting the AC adaptor, use the unit after setting itvertically. Placing the unit with the stand closed(e.g.:D 10, 3 in “Installation of the unit”) may cause damageto or malfunction with the AC adaptor.To conserve powerThis unit consumes 0.5 W (Approximately 5 W when QuickStart is set to “On”) of power even when turned off. When theunit is not going to be used for a long time, disconnect the ACmains lead from the household mains socket.This unit can be used in places without a mains socket, such asoutdoors, by attaching the included battery pack.≥The battery is not charged at the time of purchase. Chargebefore initial use.≥The battery is designed only for use with this unit. It cannot beused with other equipment.∫Attaching the battery packTurn the unit off before attaching or detaching the battery pack.≥Attach the battery after closing with the LCD screen facinginwards and the stand open.∫Detaching the battery packWhen not using for long periods of time≥Detach the battery pack (D above).(Even when the unit is turned off, there is a small amount ofvoltage running through the unit, and this may result in amalfunction.)≥Recharge the battery for re-use.∫Recharging the battery packAttach the battery pack and connect the ACadaptor (Dleft).≥The [CHARGE] indicator lights while charging the battery, andthe [CHARGE] indicator turns off when battery charging isfinished.∫Approximate recharging and play times (Hours)*1 When the unit is off [at 20 oC]*2 At room temperature using headphones [at 20 oC ]≥The times indicated on the above may differ depending onuse.≥To change the LCD brightness (> 13, “Adjusting the pictureson the LCD screen”).∫Checking the remaining battery chargeWhen the unit is on (> 12, “Turning on/off the unit”) andpowered by the battery packPress [OPTION] to check on the LCD (displaysfor a few seconds).Using the unit connected to theAC adaptorUsing the battery packAC adaptor(included)To a householdmains socketAC mains lead(included)123RELEASEDETACH ATTACHRELEASEDETACH ATTACHBottom side of this unitBattery pack(included)Clicks into placeCheck to make sure it is securely fastened.2Slide in to the right.1Bring in from theleft, aligning thegroovesRecharging*1Play* 2LCD brightness level-5 0 +57 2.5 2.25 2RELEASEDETACH ATTACHBottom side of this unit2Slide.1Press and hold.[CHARGE] indicater(Yellow light)(screen)(flashing)RechargeAppears automatically when there is only a fewminutes of charge remaining.