Panasonic DMP-B15 Operating Instructions Manual

Also see for DMP-B15 - Portable Blu-ray Player: Operating instructions Specifications Operating instructions Operating instructions

Panasonic DMP-B15 Operating Instructions Manual Manual pdf 28 page image

28RQT9338NetworkNetwork connectionThe following services can be used when this unit is connectedto the internet via a broadband connection.≥Firmware can be updated (> 31)≥You can enjoy the BD-Live (> 17)≥You can enjoy the VIERA CAST (> 30)≥Use shielded LAN cables when connecting to peripheraldevices.≥With installation where your broadband modem is connecteddirectly to your PC, a router must be installed.≥Use a router that supports 10BASE-T/100BASE-TX.≥In case all available connection on your router is being used,a hub or switch can be installed to provide additionalconnections.≥When operating the VIERA CAST, use high-speed internetservice no less than 1.5 Mbps for SD (Standard Definition)and 6 Mbps for HD (High Definition) picture quality by yourlocal broadband company.j If using slow Internet connection, the video may not bedisplayed correctly.≥Depending on a contract with your local broadband company,it may be generating communication charges.≥After connecting to the Internet, perform necessary settings.(D right)≥Inserting any cable other than a LAN cable in the LANterminal can damage the unit.Network SettingsThese settings are used if you will connect this unit to theInternet.≥The connection to the Internet may take time or the Internetmay not be connected depending on the connectionenvironment. (> 29)It is required that you use a broadband connection.Preparation≥Connect to the network. (D left)Always test the connection when a LAN cable is connected.1 Press [SETUP].2 Press [3, 4] to select “Network Settings”and press [OK].3 Press [3, 4] to select “IP Address / DNSSettings” and press [OK].4 Press [3, 4] to select “Connection Test”and press [OK].“Testing”: The test is in progress.“Pass”: The connection is completed.Press [RETURN] to exit.“Fail”: Please check the connection and settings.(> 29)≥Perform the “Connection Test” also when any change wasmade to the “IP Address / DNS Settings”.≥If the connection test fails, it may be necessary to set theMAC address of this unit at the router side. The MAC addresscan be displayed by pressing [SETUP] and selecting“Network Settings”.LANTelecommunicationsequipment (modem, etc.)Straight LAN cable(not included)Broadband router, etc.The unitInternetTesting of “IP Address / DNSSettings”NRUTERKOIP Address / DNS SettingsConnection TestOnOnOnOnOnOnIP Address Auto-AssignmentIP AddressSubnet MaskGateway AddressDNS-IP Auto-AssignmentPrimary DNSSecondary DNSConnection Speed Auto-ConfigConnection Speed SettingRETURNNetwork SettingsIP Address / DNS SettingsProxy Server SettingsNetwork ServiceMAC Address: xx-xx-xx-xx-xx-xxOK