Panasonic DMP-BD65 Operating Instructions Manual

Also see for DMP-BD45: Operating instructions Basic operating instructions Basic operating instructions

Panasonic DMP-BD65 Operating Instructions Manual Manual pdf 12 page image

12VQT2H94STEP 5 : SettingAfter connecting your new player for the first time andpressing [Í], a screen for the basic settings will appear.PreparationTurn on the television and select the appropriate videoinput on the television.1 Press [Í].Setup screen appears.If this unit is connected to a Panasonic TV (VIERA)supporting HDAVI Control 2 or later via an HDMI cable,then the setting information on the TV is acquired by thisTV.2 Follow the on-screen instructions andmake the settings with [3, 4] and press[OK].“On-Screen Language”, “TV Aspect” and “Quick Start” areset.(> 27 – 29)[BD65] After completing “Easy Setting”, you can perform“Network Easy Setting”.≥You can perform this setup anytime by selecting “Easy Setting” in theSetup menu. (> 29)≥ You can also change these settings individually. (> 27 – 29)After completing “Easy Setting”, you will be asked to perform“Network Easy Setting”.Select “Wired” or “Wireless” and press [OK].∫ “Wired” connectionFollow the on-screen instructions to make your connection settings.≥ When you experience problems (> 13)∫ “Wireless” connectionIf you select “Wireless” and “Wireless LAN Adaptor is notconnected.” is displayed, check that the Wireless LANAdaptor is fully inserted. Alternatively, disconnect andreconnect it. If there is still no change in the display, consultyour dealer for advice.Select “WPS (PUSH button)” or “Search foraccess point” and then follow the on-screeninstructions and make the settings.WPS (PUSH button):If your Wireless router (Access point)supports WPS (PUSH button), you caneasily perform the settings by pressing WPSbutton on it.WPS (Wi-Fi Protected Setup) is a standard thatfacilitates settings relating to the connectionand security of wireless LAN devices.1 Press WPS button or corresponding button of Wirelessrouter (Access point) until the lamp starts flashing.≥ For details, refer to the operating instruction of Wirelessrouter (Access point).2 Press [OK].*1 Wi-Fi Protected Setup-compatible Wireless router (Access point) mayhave the mark.Search for access point:Available Wireless routers (Access points) are searched andlisted. You can select the one to use from the list.1 Press [3, 4] to select SSID* 2 of Wireless router (Accesspoint) you want to connect with. Then press [OPTION] toshow information of the selected router, make a note ofthe authentication and encryption type.≥ If you can not find the SSID* 2, select “Search again”.2 Press [RETURN] and then press [OK].Then select an item on the following screen whichcorresponds to the authentication type noted down in step1 above.Follow the on-screen instructions to make the settings.≥ Input your encryption key code in “Encryption Key”supplied with your Wireless router (Access point).Easy SettingNetwork Easy Setting [BD65]OKRETURNNetwork Easy Setting (Connection Test)WiredWirelessSelect a connection mode.Current setting : WiredLAN cable connection:Connect a LAN cable to the unit and select “Wired”.Wireless LAN connection:Connect the Wireless LAN Adaptor (DY-WL10) to the USBport and select “Wireless”.Access Point Connection SettingSelect a connection method for access toWireless LAN.Please refer to the operating instructions ofthe access point about connection methods.WPS (PUSH button)Search for access point* 1e.g.OKAccess Point Connection SettingReceptionSelect an access point to connect with.To search for access point again, pleaseselect "Search again" below.SSIDXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXSearch againSSIDWireless typeAuthentication typeEncryption type:XXXXXXXXXXXXXXX:802.11n/g/b (2.4GHz):WPA-PSK:AESAccess Point Connection SettingWPA2-PSK (AES/TKIP)WPA-PSK (AES/TKIP)Open/Shared Key (WEP)Open systemSelect authentication type.