Panasonic DMP-BD75 Operating Instructions Manual

Also see for DMP-BD75: Owner's manual Basic operating instructions

14 VQT3B11Playing video contents1 Insert the media.When the contents menu is displayed, press[3, 4, 2, 1] to select the item. ( 13)2 Press [3, 4] to select the title and press[OK].∫ To show menusYou can display Top Menu, DIRECT NAVIGATOR or Pop-upMenu.Press [TOP MENU] or [POP-UP MENU].≥ Press [3, 4, 2, 1] to select the item and press [OK].∫ To show the status messagesWhile playing, press [STATUS].The status messages give you information about what iscurrently being played. Each time you press [STATUS], thedisplay information may change or will disappear from thescreen.≥ Signal from PAL discs is output as PAL. Signal from NTSC discs isoutput as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in“NTSC Contents Output” for NTSC discs. ( 25)≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.Press [∫STOP] when you have finished playback to protect the unit’smotor, your television screen and so on.≥ Depending on media and contents, the display may change or may notappear.≥ DivX and MKV: Successive play is not possible.≥ It is not possible to playback AVCHD and MPEG2 video which havebeen dragged and dropped, copied and pasted to the media.≥ To save on electricity, the unit is turned off automatically if there is nobutton operation for about 30 minutes when not playing back (such aswhen paused, displaying the menu, displaying still pictures, etc.).These functions may not work depending on the media andcontents.Press [∫STOP].The stopped position is memorized.Resume play functionPress [1PLAY] to restart from this position.≥ The position is cleared if the tray is opened or you press[∫STOP] several times to display “StOP” on the unit’sdisplay.≥ On BD-Video discs including BD-J, the resume playfunction does not work.Press [;PAUSE].≥ Press [;PAUSE] again or [1PLAY] to restart play.SearchWhile playing, press [SEARCH6] or[SEARCH5].≥ Music and MP3: The speed is fixed to a single step.Slow-motionWhile paused, press [SEARCH5].The speed increases up to 5 steps.≥ Press [1PLAY] to revert to normal playback speed.While playing or paused, press [:] or[9].Skip to the title, chapter or track you want to play.≥ Each press increases the number of skips.While paused, press [1] (;1).≥ Press and hold to change in succession forward.≥ Press [1PLAY] to revert to normal playback speed.Press [AUDIO].You can change the audio channel number or soundtracklanguage, etc.BD DVD CD USBPlayBD-Video T1 C1 0:05.140:20.52e.g.BD-VideoTotal timeElapsed time in the titleCurrent positionT: Title, C: Chapter, PL: PlaylistOther operations during playStopPauseSearch/Slow-motionSkipFrame-by-frameChanging audio