Panasonic DMP-BD75 Operating Instructions Manual

Also see for DMP-BD75: Owner's manual Basic operating instructions

3VQT3B11Getting startedGetting startedSafety precautionsUnit≥ To reduce the risk of fire, electric shock or product damage,– Do not expose this unit to rain, moisture, dripping or splashing.– Do not place objects filled with liquids, such as vases, on this unit.– Use only the recommended accessories.– Do not remove covers.– Do not repair this unit by yourself. Refer servicing toqualified service personnel.– Do not let metal objects fall inside this unit.– Do not place heavy items on this unit.AC mains lead≥ To reduce the risk of fire, electric shock or product damage,– Ensure that the power supply voltage corresponds to thevoltage printed on this unit.– Insert the mains plug fully into the socket outlet.– Do not pull, bend, or place heavy items on the lead.– Do not handle the plug with wet hands.– Hold onto the mains plug body when disconnecting the plug.– Do not use a damaged mains plug or socket outlet.≥ Install this unit so that the AC mains lead can be unpluggedfrom the socket outlet immediately if any problem occurs.Unit≥ This unit utilizes a laser. Use of controls or adjustments orperformance of procedures other than those specifiedherein may result in hazardous radiation exposure.≥ Do not place sources of naked flames, such as lighted candles, on this unit.≥ This unit may receive radio interference caused by mobiletelephones during use. If such interference occurs, pleaseincrease separation between this unit and the mobile telephone.[For[Australia[and[New[Zealand]≥ This unit is intended for use in moderate climates.[For]Asia,]Middle]East]and]India]≥ This unit is intended for use in tropical climates.Placement≥ Place this unit on an even surface.≥ To reduce the risk of fire, electric shock or product damage,– Do not install or place this unit in a bookcase, built-incabinet or in another confined space. Ensure this unit iswell ventilated.– Do not obstruct this unit’s ventilation openings withnewspapers, tablecloths, curtains, and similar items.– Do not expose this unit to direct sunlight, hightemperatures, high humidity, and excessive vibration.Batteries≥ Danger of explosion if battery is incorrectly replaced. Replaceonly with the type recommended by the manufacturer.≥ Mishandling of batteries can cause electrolyte leakageand may cause a fire.– Do not mix old and new batteries or different types at the same time.– Do not heat or expose to flame.– Do not leave the battery(ies) in a car exposed to direct sunlightfor a long period of time with doors and windows closed.– Do not take apart or short circuit.– Do not recharge alkaline or manganese batteries.– Do not use batteries if the covering has been peeled off.– Remove batteries if you do not intend to use the remotecontrol for a long period of time. Store in a cool, dark place.≥ When disposing the batteries, please contact your localauthorities or dealer and ask for the correct method of disposal.Caution for AC Mains Lead(For Saudi Arabia)For your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mainsplug for your safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced please ensure that thereplacement fuse has a rating of 5-ampere and that it isapproved by ASTA or BSI to BS1362.Check for the ASTA mark Ï or the BSI mark Ì on the bodyof the fuse.If the plug contains a removable fuse cover you must ensurethat it is refitted when the fuse is replaced.If you lose the fuse cover the plug must not be used until areplacement cover is obtained.A replacement fuse cover can be purchased from your localdealer.If a new plug is to be fitted please observe the wiring codeas stated below.If in any doubt please consult a qualified electrician.IMPORTANTThe wires in this mains lead are coloured in accordance with thefollowing code:Blue: Neutral, Brown: Live.As these colours may not correspond with the coloured markingsidentifying the terminals in your plug, proceed as follows:The wire which is coloured Blue must be connected to the terminalwhich is marked with the letter N or coloured Black or Blue.The wire which is coloured Brown must be connected to theterminal which is marked with the letter L or coloured Brown or Red.WARNING: DO NOT CONNECT EITHER WIRE TO THEEARTH TERMINAL WHICH IS MARKED WITH THELETTER E, BY THE EARTH SYMBOL Ó OR COLOUREDGREEN OR GREEN/YELLOW.THIS PLUG IS NOT WATERPROOF—KEEP DRY.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according to the type of ACmains plug (figures A and B). Confirm the AC mains plugfitted and follow the instructions below.Illustrations may differ from actual AC mains plug.1. Open the fuse cover with a screwdriver.2. Replace the fuse and close or attach the fuse cover.WARNINGCAUTIONCAUTION!IF THE FITTED MOULDED PLUG IS UNSUITABLEFOR THE SOCKET OUTLET IN YOUR HOME THENTHE FUSE SHOULD BE REMOVED AND THE PLUGCUT OFF AND DISPOSED OF SAFELY.THERE IS A DANGER OF SEVERE ELECTRICALSHOCK IF THE CUT OFF PLUG IS INSERTED INTOANY 13-AMPERE SOCKET.Fuse coverFigure A Figure BFigure A Figure B Fuse(5 ampere)Fuse(5 ampere)Getting startedConnections and settingsPlaybackSettingsReference