Getting startedVQT3C1418Common Operations1 Turn on the TV, then select the appropriateAV input to suit the connections to thisunit.2 Press [Í] on the remote control or [Í/I]on this unit.The Easy Setting will start at the initial power on afterpurchasing this unit. (> 20)≥When the indicator on this unit's display blinks, do notturn off the unit or remove the media. Such action mayresult in loss of the media contents.≥When inserting the media, ensure that it is facing the rightway up.≥Wipe off the dust or fingerprints from the discs before use.(> 103)≥Return discs to their cases or cartridges after use; thishelps to protect the discs against scratches and dust.≥When removing the SD card, press on the centre of thecard and pull it straight out.≥If you connect a Panasonic product with a USB connectioncable, setup screen may be displayed on the connectedequipment. For details, refer to the instructions for theconnected equipment.∫ To select a drivePress [DRIVE SELECT] to select the media drive that youoperate.∫ Release disc protection[BD-RE] [BD-R] [RAM]If the disc is protected when writing to the disc, release theprotection (> 68, Setting the protection).The HOLD function deactivates all buttons on the unit andremote control.To cancel the HOLD functionPress and hold [OK] and [RETURN ] simultaneously until“X HOLD” disappears.PreparationsTurning on this unitTIME SLIPDISPLAYSTATUSSETUPAUDIO-10s +60sREC MODE PROG/CHECKRECTEXT STTLCHAPTERFUNCTIONMENUDIRECTNAVIGATORGUIDERETURNPLAY/x1.3PAUSEPAUSE LIVE TVSTOPSLOW/SEARCHSKIPCHPAGESELECTINPUTCHAVTVDRIVESELECTDELBYGREXITOKOPTIONMANUAL SKIPVOL02abc5jkl8 tuv14 ghi7 qrsp3def6mno9 xyzwINPUTREWIND LIVE TVTV operationarea (> 93)Inserting or removing a mediaHOLD functionPress and hold [OK] and[RETURN ]simultaneously until“X HOLD” appears onthe unit’s display.Press [< OPEN/CLOSE] onthe main unit to open the trayand insert a disc.SD cardUSB memoryUnit’s display