Panasonic DMR-E500HS Operating Instructions Manual

Also see for DMR-E500HS: Operating instructions Firmware instructions

Contents

16RQT7758Getting startedSTEP 5 Setting up the Network∫ To check and set the computer’s IP addressOn the computer1 Click [start] ➜ [Control Panel].Double-click [Network Connections].2 Right-click the [Local AreaConnection]§ icon and click[Properties].§ A message may appear below the icon such as [BridgeConnection] or [Network Bridge].3 Select [Internet Protocol (TCP/IP)]and click [Properties].4 Check the IP address setting.≥If “Obtain an IP address automatically” is selectedSelect “Use the following IP address:” and enter the IPaddress and so on as shown in the example below.Example:Please make a note of the “IP address”, “Subnet mask”,“Default gateway” and “Preferred DNS server” settings(These will be needed during DVD recorder setting).5 Click [OK].You will exit the “Internet Protocol (TCP/IP) Properties”window.6 Click [OK].You will exit the “Local Area Connection Properties” window.≥Screen shots reprinted by permission from Microsoft Corporation.VOLUMECHDVDTVAV1 2 34 5 67 809MANUAL SKIPCHCANCELINPUT SELECTSKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUCREATECHAPTERTIMERPROG/CHECKREC MODEERASE RECAUDIOTIME SLIPSTATUSDISPLAYFA B CDUBBINGHDD DVD SD/PCG-Code-/--3,4,2,1ENTERSUB MENU¢ CANCEL:, 9RETURNFUNCTIONSNumberedbuttonsTo set the IP address manuallyIP address: 192.168.0.15Subnet mask: 255.255.255.0Default gateway: 192.168.0.1Preferred DNS server: 192.168.0.1