Panasonic DMR-E500HS Operating Instructions Manual

Also see for DMR-E500HS: Operating instructions Firmware instructions

Contents

50RQT7758Transfer (Dubbing)Recording from a video cassette recorderRefer to the control reference on page 49.[HDD] [RAM]When the “DV AUTO REC” function is used, programmes arerecorded as a title while at the same time chapters are created ateach break in the images and the play list is created automatically.Preparation1 Turn off the main unit and DV equipment, then connect theequipment with the unit’s DV input terminal (➡ page 49).2 Turn on the main unit and DV equipment.3 Pause play of the DV equipment at the point you want recordingto start.4 Press [HDD] or [DVD] to select the recording drive.≥When the output signal from the external equipment is NTSC,change the “TV System” to “NTSC” in the SETUP menu (➡page 65).1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select “DVAUTO REC” and press [ENTER].3 Press [REC MODE] to select therecording mode.4 Press [2, 1] to select “Rec” andpress [ENTER].Recording starts.When recording finishesThe confirmation screen appears. Press [ENTER] to finish DVautomatic recording.To stop recordingPress [∫].[Note]≥Only one piece of DV equipment (e.g., digital video camcorder) canbe connected to the unit via the DV input terminal.≥It is not possible to operate the unit from the connected DVequipment.≥The DV input on this unit is for use with DV equipment only. (Itcannot be connected to a computer, etc.)≥The DV equipment name may not be shown correctly.≥Depending on the DV equipment, the images or audio may not beinput properly.≥The date and time information on the tape of the DV equipment willnot be recorded.≥You cannot record and play simultaneously.≥Even if you set the simultaneous MPEG4 recording function(➡page 22), MPEG4 recording will not take place.DV automatic recording (DV AUTO REC)If the DV automatic recording function does not work properly,check the connections and DV equipment settings, and turn theunit off and back on.If that does not work, follow the instructions for manualrecording (➡ page 49).Transferring (dubbing) still pictures[HDD] [RAM] [SD] [PC]1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select“DUBBING” and press [ENTER].≥If you are not going to change the registered list press [4]several times (➡page 51, step 7).3 Press [3, 4] to select “DubbingDirection” and press [1].1 Press [3, 4] to select “Source” and press [ENTER].2 Press [3, 4] to select the drive and press [ENTER].3 Press [3, 4] to select “Destination” and press[ENTER].4 Press [3, 4] to select the drive and press [ENTER].The same drive as the transfer (dubbing) source can be selected.5 Press [2] to confirm.4 Press [3, 4] to select “DubbingMode” and press [1].1 Press [3, 4] to select “Format” and press [ENTER].2 Press [3, 4] to select “PICTURE” and press [ENTER].“Recording Mode” is automatically set to “High Speed”.3 Press [2] to confirm.5 Press [3, 4] to select “Create List”and press [1].Select the transferring (dubbing) items and register on the list.Still pictures and folders cannot be registered on the same list.∫ To register individual still pictures1 Press [3, 4] to select “New item” and press [ENTER].2 Press [3, 4, 2, 1] to select the still picture and press[ENTER].≥To select a multiple number of items together, press [;]to add the check mark and press [ENTER] (➡page 51,Multiple editing).≥To show other pages (➡ page 51)≥To select the still pictures in another folder (➡ page 51)≥To edit the transferring (dubbing) list (·page 51)Transferring (dubbing) using thetransferring (dubbing) list1 2 34 5 67 809MANUAL SKIPCHCANCELSKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUHDD DVD SD/PC3,4,2,1ENTERSUB MENU RETURNFUNCTIONSSD/PC:, 9;G-Code-/--DUBBINGSD CARDHDDSelect the dubbing direction.123SourceDestinationCancel AllDubbing DirectionDubbing ModeCreate ListSD CARD > HDDPICTURE High Speed001/01DUBBING Create dubbing list.Destination Capacity: 4343MBNo. SizePreviousNew itemNextSetENTERRETURN123Cancel All PictureDubbing DirectionDubbing ModeCreate ListPicture/FolderStart DubbingSD CARD > HDDPICTURE High SpeedName of item