Panasonic DMR-E85H DIGA Operating Instructions Manual

Also see for DIGA DMR-E85H: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

48RQT7305ReferenceError messagesOn the television PageOn the unit’s display1. Damage requiring service—The unit should be serviced by qualified service personnel if:(a) The AC power supply cord or AC adaptor has been damaged; or(b) Objects or liquids have gotten into the unit; or(c) The unit has been exposed to rain; or(d) The unit does not operate normally or exhibits a marked change in performance; or(e) The unit has been dropped or the cabinet damaged.2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorizedservicing personnel.3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the samecharacteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.For product information or assistance with product operation:In the U.S.A., refer to “Customer Services Directory” on page 52.In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or anauthorized Servicentre closest to you.Cannot finish recordingcompletely.pThe program was copy-protected.pThe HDD or disc may be full.——Cannot play. pYou inserted an incompatible disc (Discs recorded in PAL video, etc.). —Cannot record on the disc. pThe disc may be dirty or scratched. 15Please check the disc.Unable to format.Cannot record. Disc is full. pCreate space by erasing any unnecessary titles. [HDD] [RAM]pUse a new disc. [RAM] [DVD-R]26, 31, 39—Cannot record. Maximumnumber of titles exceeded.Error has occurred. Pleasepress ENTER.pPress [ENTER] to start recovery process. You cannot operate the unit while it is recovering(“SELF CHECK” appears on the unit’s display).—No disc pThe disc may be upside down. —Please change the disc. pThere may be a problem with the disc. Press [ OPEN/CLOSE] on the main unit toremove it and check it for scratches or dirt. (The unit turns off automatically after you openthe tray.)15This is a non-recordable disc. pThe unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.pYou inserted an unformatted DVD-RAM. Format the disc with this unit.—39This disc is not formattedproperly. pThe operation is prohibited by the unit or disc. —CHK REMOTE (“t” stands for a number.)pThe remote control and main unit are using different codes. Change the code on theremote control.Press and hold [ENTER] and the indicated number button atthe same time for more than 2 seconds.13HARD ERR pIf there is no change after turning the unit on and off, consult the dealer where the unit waspurchased.—HDD SLP pIn order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate. 15NO READ pThe disc is dirty or badly scratched. The unit cannot record, play, or edit.pYou have used a DVD-RAM/PD lens cleaner and it has finished. Press [ OPEN/CLOSE]on the main unit to eject the disc.15—PLEASE WAIT pDisplayed when the unit is started. This is not a malfunction. —SELF CHECK pThere was a power failure or the AC plug was disconnected while the unit was on. The unitis carrying out its recovery process. Wait until the message disappears.—UNSUPPORT pYou have inserted a disc the unit cannot play or record on. 14U14 pThe unit is hot.The unit switches to standby for safety reasons. Wait for about 30 minutes until themessage disappears.Select a position with good ventilation when installing the unit. Do not block the cooling fanon the rear of the unit.—U99 pThe unit fails to operate properly. Press [POWER ¦/I] on the main unit to switch the unit tostandby. Now press [POWER ¦/I] on the main unit again to turn the unit on.—Product ServiceProduct information