Panasonic DMR-E85HS Operating Instructions Manual

Also see for DIGA DMR-E85: Firmware instructions

Contents

16RQT7305RecordingRecording television programs[HDD] [RAM] [DVD-R]≥It is not possible to record to both HDD (Hard Disk Drive) and DVDdrive simultaneously.≥It is not possible to record continuously from one side of a doublesided disc to the other. You will need to eject the disc and turn it over.≥W hen using 8 cm (3″) DVD-RAM, remove the disc from the cartridge.≥You can record up to 500 titles on HDD, 99 titles on one disc.≥It is not possible to record CPRM (➡ page 46) protected materialonto DVD-R or 2.8 GB DVD-RAM discs.PreparationPress [RETURN] to exit the television program list if it is displayed onthe television. To turn off auto start up of the television program list➡ page 23, Selecting the TV Guide On Screen system start uppattern.1 Press [HDD] or [DVD] to select therecording drive.The HDD or DVD indicator lights up on the unit.2 If you selected the DVD drivePress [< OPEN/CLOSE] on the mainunit to open the tray and insert a disc.≥Press the button again to close the tray.≥If you put a disc in while the HDD is selected, the DVDindicator on the unit will flash while the unit reads the disc.3 Press [W X CH] to select the channel.To select with the numbered buttons:≥Select the audio to record (➡ page 17).4 Press [REC MODE] to select therecording mode (XP, SP, LP, or EP).≥To record sound using LPCM (XP mode only):Set “Audio for XP Recording” to “LPCM” in the SETUPmenu. (➡ page 42)5 Press [¥ REC] to start recording.Recording will take place on open space on the HDD or ondisc. Data will not be overwritten.≥You cannot change the channel or recording mode duringrecording.≥You can record while the unit is on standby for timer recording, butonce the time for the timer recording to begin is reached, anyrecording taking place will stop and the timer recording will begin.∫ To stop recordingPress [∫].Recorded as 1 title until the position where stopped.[HDD]When continuously recording for long durations, titles areautomatically divided every 8 hours.[DVD-R]It takes about 30 seconds for the unit to complete recordingmanagement information after recording finishes.∫ To pause recordingPress [;].Press again to restart recording.(Title is not split into separate titles.)∫ To specify a time to stop recording—One TouchRecordingDuring recordingPress [¥ REC] to select the recording time.Each time you press the button:≥This does not work during timer recordings (➡ page 19) or whileusing Flexible Recording (➡ page 18).Off TimerThe unit switches to standby after about 6 hours in the stop mode.You can turn this feature off or change the time to 2 hours(➡ page 40, “Off Timer”).Regarding DVD-R≥When transferring (dubbing) a title recorded with the high speedmode to a DVD-R, set “DVD-R High-Speed Recording” to “On”before recording to the HDD. (➡ page 41)≥In order to play a DVD-R recorded using this unit on anotherplayback source, the disc must first be finalized (➡ page 39).POWERVOLUMECHINPUT SELECTDVD POWER TVTV/VIDEO1HDD DVD2 34 5 67 809CM SKIPAUDIOPAGEDRIVE SELECTCHCANCEL VCR Plus+SKIPSTOP PAUSE PLAY/x1.3SLOW/SEARCHFUNCTIONSENTERDIRECT NAVIGATORTOP MENURETURNSUB MENUCHAPTERSETUPInfoPROG/CHECK TV GUIDEREC MODEERASE RECSTATUSTIME SLIPDISPLAYDUBBINGAUDIO3213 4 2 1ENTERRETURNTIME SLIP345FUNCTIONSSTATUSINPUT SELECTDIRECTNAVIGATOR1∫;PULL OPENOPEN/CLOSEREC/ x 1.3TIME SLIPPOWERCHL2 S-VIDEO IN VIDEO IN AUDIO IN RL/MONOTIME SLIPHDD DVD DRIVE SELECT∫ 11 5TIME SLIPNumberedbuttonsL2 input terminals Time Slip indicatorHDD, DVD indicatorInsert with the arrow facing in.Insert fully so it clicksinto place.Insert label-up.TV Mode (Airwaves)e.g., 5: [0] ➡ [5]15: [1] ➡ [5]CATV Mode (Cable)e.g., 5: [0] ➡ [0] ➡ [5]15: [0] ➡ [1] ➡ [5]115: [1] ➡ [1] ➡ [5]0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00^"""""""""""" Counter (cancel) ,"""""""""""}HDDSPCHHDD XPCHRemaining time on the discHDD XPCHREC