Panasonic DMR-EH50 Operating Instructions Manual

Also see for Diga DMR-EH50: Operating instructions Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

Panasonic DMR-EH50 Operating Instructions Manual Manual pdf 23 page image

23RQT8033Getting startedYou can configure the remote control TV operation buttons to turnthe television on/off, change the television input mode, select thetelevision channel and change the television volume.1 Point the remote control at the televisionWhile pressing [Í TV], enter thecode with the numbered buttons.Manufacturer and Code No.2 Test by turning on the television andchanging channels.≥Repeat the procedure until you find the code that allowscorrect operation.≥If your television brand is not listed or if the code listed foryour television does not allow control of your television, thisremote control is not compatible with your television.[Note]≥If your television brand has more than one code listed, select theone that allows correct operation.Change the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonic productsclose together.Use “DVD 1”, the factory set code, under normal circumstances.1 While stoppedPress [FUNCTIONS].2 Press [3, 4] to select “To Others”and press [ENTER].3 Press [3, 4] to select “SETUP” andpress [ENTER].4 Press [3, 4] to select “Others” andpress [1].5 Press [3, 4] to select “RemoteControl” and press [ENTER].6 Press [3, 4] to select the code(“DVD 1”, “DVD 2” or “DVD 3”) andpress [ENTER].7 To change the code on the remote controlWhile pressing [ENTER], press andhold the numbered button ([1], [2] or[3]) for more than 2 seconds.8 Press [ENTER].∫ When the following indicator appears on theunit’s displayThe unit’s remotecontrol codeChange the code on the remote control to match the main unit’s(➡ step 7).[Note]Executing “Shipping Condition” in the SETUP menu returns themain unit code to “DVD 1”. Change the remote control code to 1(➡ step 7).To return to the previous screenPress [RETURN].To exit the screenPress [RETURN] several times.Television operatione.g., 01: [0] ➡ [1]Brand Code Brand CodePanasonic 01/02/03/04/45NOKIA 25/26/27AIWA 35 NORDMENDE 10AKAI 27/30 ORION 37BLAUPUNKT 09 PHILIPS 05/06BRANDT 10/15 PHONOLA 31/33BUSH 05/06 PIONEER 38CURTIS 31 PYE 05/06DESMET 05/31/33 RADIOLA 05/06DUAL 05/06 SABA 10ELEMIS 31 SALORA 26FERGUSON 10 SAMSUNG 31/32/43GOLDSTAR/LG 31 SANSUI 05/31/33GOODMANS 05/06/31 SANYO 21GRUNDIG 09 SBR 06HITACHI 22/23/31/40/41/42SCHNEIDER 05/06/29/30/31INNO HIT 34 SELECO 06/25IRRADIO 30 SHARP 18ITT 25 SIEMENS 09JVC 17/39 SINUDYNE 05/06/33LOEWE 07 SONY 08METZ 28/31 TELEFUNKEN 10/11/12/13/14MITSUBISHI 06/19/20 THOMSON 10/15/44MIVAR 24 TOSHIBA 16NEC 36 WHITEWESTINGHOUSE05/06When other Panasonic productsrespond to this remote controlSETUPTuningRemote ControlPress “±” and “ENTER” togetherfor more than 2 seconds on the remotecontrol.DiscPicture