Panasonic DMR-EH69 Operating Instruction

Also see for Diga DMR-EH59: Operating instructions

64RQT9274Additional connections≥To enjoy multi-channel surround sound DVD-Video, connect anamplifier with Dolby Digital, DTS and MPEG decoders.“Digital Audio Output” in the Setup menu (> 59)≥When this unit is connected to an amplifier with an optical digitalaudio cable and connected to a television with an HDMI cable, youcan enjoy the highest quality of audio from the disc by setting“Digital Audio Output” to “Optical Only” in the Setup menu (> 60).In this case audio is only output from the amplifier not thetelevision.≥Before purchasing an optical digital audio cable (not included),check the terminal shape of the connected equipment.≥You cannot use DTS Digital Surround decoders not suited to DVD.≥Connect to terminals of the same colour.≥Supplied Audio/Video cable can also be used as an alternative forAudio cable without connecting the video connector (yellow).When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digitalvideo and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Definition Television), the output can be switched to1080p, 1080i or 720p HD video.≥Video sources converted to 1920k1080 resolution, while of high quality, will exhibit somewhat lower subjective image resolution than true,native 1080p full-HD sources. See dealer for details.≥Please use High Speed HDMI cables that have the HDMI logo (as shown on the cover).≥When setting video output to “1080p”, please use the HDMI cables 5.0 meters or less.≥If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (> 78) andoutput as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)≥You cannot connect this unit to DVI devices that are incompatible with HDCP.For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI inputterminal (PC monitors, etc.):Depending on the unit, images may not be displayed properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot beoutput.)Connecting an amplifier with a digitalinput terminalRequired settingOUTAV2 (EXT )AV1(TV)OPTICALDIGIDIGITTALAL AAUDIO OUUDIO OUTT(PCM/BITSTREAM)(PCM/BITSTREAM)COMPONENTCOMPONENTVIDEO OUTVIDEO OUTPRPBYOUTOUTAAV4 IV4 I NNOPTICAL INOptical digital audio cableDo not bend sharply whenconnecting.This unit’s rear panelInsert fully, withthis side facingup.Amplifier’s rear panelConnecting a stereo amplifierS-VIDEOVIDEOR-AUDIO-LOUTOUTAAV4 IV4 I NNAUDIO INR LAudio cableThis unit’s rear panelAmplifier’s rear panelConnecting with an HDMI compatible television and receiverRegarding VIERA Link “HDAVI ControlTM ” functionWhen connecting with a Panasonic TV (VIERA) or a receiver equipped with the “HDAVI Control” function, linked operations would bepossible. [> 34, Linked operations with the TV (VIERA Link “HDAVI Control TM ”)]≥Non-HDMI-compliant cables cannot be utilised.≥It is recommended that you use Panasonic’s HDMI cable.Recommended part number:RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.RFRFININRFRFOUTOUTAV2 ( EXT )AV1(TV)OPTICALDIGIDIGITTALAL AAUDIO OUUDIO OUTT(PCM/BITSTREAM)(PCM/BITSTREAM)COMPONENTCOMPONENTVIDEO OUTVIDEO OUTPRPBYAAV OUV OUTTS-VIDEOVIDEOR-AUDIO- LOUTOUTAAV4 IV4 I NNHDMI AV OUTHDMI INHDMI IN HDMI OUTHDMI cableHDMI cableTelevision’s rear panelReceiver’s rearpanel≥Set “Digital Audio Output” to “HDMIand Optical” (> 60).(The default setting is “HDMI andOptical”.)Required settingThis unit’s rear panelNoteDownloaded From Disc-Player.com Panasonic Manuals