Panasonic DMR-EH69 Operating Instruction

Also see for Diga DMR-EH59: Operating instructions

74RQT9274Cannot display DIRECT NAVIGATOR screen.¾ This screen cannot be displayed during recording or copy.Cannot edit or format a card. ([EH69])¾ Release the card’s protection setting. (With some cards, the“Write Protection Off” message sometimes appears on thescreen even when protection has been set.) (> 54)The contents of the card cannot be read. ([EH69])¾ Remove the card from the slot and then insert again. If thisdoes not solve the problem, turn off and turn on the unit again.¾ The card format is not compatible with the unit. (The contentson the card may be damaged.)This unit is compatible with SD Memory Cards that meet SDCard Specifications FAT12 and FAT16 formats, as well asSDHC Memory Cards in FAT32 format. (> 13, 14)¾ The card contains a folder structure and/or file extensions thatare not compatible with this unit. (> 13)¾ You can use SD Memory Cards with capacities from 8 MB to 2GB and SDHC Memory Cards with capacities from 4 GB to32 GB.¾ This unit cannot play AVCHD format motion pictures or MPEG4on an SD card.Copying, deleting and setting protection takes along time. ([EH69])¾ When there are a lot of folders and files, it may sometimes takea few hours.¾ When repeating copying or deleting, it may sometimes take along time. Format the disc or card. (> 55)Still pictures (JPEG) do not playback normally.¾ The images that were edited on the PC, such as ProgressiveJPEG etc., may not playback. (> 14)The contents of the USB memory cannot be read.¾ Remove the USB memory from the USB port and then insertagain. If this does not solve the problem, turn off and turn on theunit again.¾ Check that the USB memory is inserted correctly. (> 15)¾ The format of the USB memory or of its contents is notcompatible with the unit. (The contents on the USB memorymay be damaged.) (> 13, 14)¾ The USB memory contains a folder structure and/or fileextensions that are not compatible with this unit. (> 14)¾ Turn off and then turn on the unit again.¾ USB memories connected using a USB extension cable or aUSB hub may not be recognized by this unit.¾ Some USB memories cannot be used with this unit. (> 13)¾ If inserted during playback, recording or copying etc., the USBmemory may not be recognized by this unit.VIERA Link doesn’t work.¾ Check the HDMI cable connection. Check that “HDMI” isdisplayed on the front display when the power for the main unitis set to On.¾ Make sure that “VIERA Link” is set to “On”. (> 60)¾ Check the “HDAVI Control” settings on the connected device.¾ Some functions may not work depending on the version of“HDAVI Control” of the connected equipment. This unit supports“HDAVI Control 4” functions.¾ If the connection for the equipment connected with HDMI waschanged, or if there was a power failure or the plug wasremoved from the household mains socket, “HDAVI Control”may not work.In this case, perform the following operations.1 When the HDMI cable is connected to all equipment with thepower on, turn the TV (VIERA) on again.2 Change the TV (VIERA) settings for the “HDAVI Control”function to off, and then set to on again. (For moreinformation, see the VIERA operating instructions.)3 Switch the VIERA input to HDMI connection with this unit,and after this unit’s screen is displayed check that “HDAVIControl” is working.The operation on this unit (music playback etc.)is interrupted.¾ The operation on this unit may be interrupted when you pressbuttons on the TV remote control that do not work for VIERALink functions.To return all the settings other than the main onesto the factory preset¾ Select “Yes” in “Shipping Condition” in the Setup menu. All thesettings except for the ratings level, ratings password and clocksettings return to the factory preset. The timer recordingprogrammes are also cancelled. (> 61)¾ Select “Yes” in “Default Settings” in the Setup menu. All thesettings other than the tuning settings, clock settings, countrysettings§, disc language settings, ratings level, ratingspassword, remote control code, return to the factory presets.The timer recording programmes are also cancelled. (> 61)¾ Press and hold [X CH] and [CH W] on the main unit until thecountry setting screen§ or the Auto-Setup screen appears. Allthe settings except for the ratings level, ratings password andclock settings return to the factory preset. The timer recordingprogrammes are also cancelled.§Only for New Zealand.To reset the ratings level settings¾ While the disc tray is open, press [DRIVE SELECT] to selectthe DVD drive, then press and hold [¥ REC] and [1] (PLAY) onthe main unit at the same time for 5 or more seconds.To restore the unit if it freezes due to one of thesafety devices being activated¾ Press and hold [Í/I] on the main unit for 10 seconds. (Thesettings remain.)Still picturesUSBVIERA LinkTo reset this unitDownloaded From Disc-Player.com Panasonic Manuals