Panasonic DMR-ES30V Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Operating instructions Quick setup guide Operating instructions Operating manual

Contents

Panasonic DMR-ES30V Operating Instructions Manual Manual pdf 62 page image

62TuningOthersDiscPictureSoundDisplayConnectionSETUPTuningOthersDiscPictureSoundSETUP Digital Audio OutputDisplayConnectionDynamic Range Compression OffBilingual Audio Selection M1Digital Audio OutputSELECTRETURNTABPCM Down Conversion OffDolby Digital BitstreamDTS BitstreamExt Link 1Dolby DigitalBitstreamPCMRETURNSELECTENTERMPEG PCMSETUP DVDDynamic RangeCompressionBilingualAudio Selection If you want to record programmes on discs that were broadcast in dual channel tone, youcan choose between the original language [M 1] or another available language [M 2].If you are copying from an external source or a tape position to discs, select the soundtrack on the other unit.[M 1] [M 2]Select the appropriate setting if an external unit is connectedto the DIGITAL AUDIO OUT of the DVD Recorder.On: The level of quiet sections is increased and the level of loud sections isdecreased. The sound is still clearly audible when the volume is decreased.Bitstream: The connected unit can decode the corresponding signal.PCM: If the connected unit cannot decode the corresponding signal, the setting must beswitched to [PCM]. Otherwise, strong noise can cause damage to hearing orloudspeakers.Perform settings based on your audio system.ON: The connected unit cannot process signals with a scan frequency of 96 kHz or88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz.Off: The connected unit can process signals with a scan frequeny of 96 kHz or 88.2 kHz.Signals are output as 96 kHz or 88.2 kHz.[ON] [Off][ON] [Off]Select the audio output mode at a scanning frequency of 96 kHz or 88.2 kHz. Despite thissetting, signals are converted to 48 kHz or 44.1 kHz if they have a scanning frequency ofmore than 96 kHz or 88.2 kHz or a disc is copy-protected.[Bitstream] [PCM]Digital Audio OutputPCM Down ConversionDolby DigitalDTSMPEGENTER ENTERSound Setting OptionPCM Down ConversionDolby DigitalDTSMPEGDVD-V(only Dolby Digital)FUNCTIONS To OthersFUNCTIONS Selection Menu-R ( )-RW V +R