Panasonic DMR-ES40VP Service Manual

4511.4. (DVD) Standard Inspection Specifications after Making RepairsAfter making repairs, we recommend performing the following inspection, to check normal operation.Use the following checklist to establish the judgement criteria for the picture and sound.No. Procedure Item to Check1 Turn on the power, and confirm items pointed out. Items pointed out should reappear.2 Insert RAM disc. The Panasonic RAM disc should be recognized.3 Enter the EE (TU IN / AV IN - AV OUT) mode. No abnormality should be seen in the picture, sound or operation.4 Perform auto recording and playback for one minute using the RAMdisc.No abnormality should be seen in the picture, sound or operation.5 If a problem is caused by a VCD, DVD-R, DVD-Video, Audio-CD, orMP3, playback the test disc.No abnormality should be seen in the picture, sound or operation.6 After checking and making repairs, upgrade the firmware to the lat-est version.Make sure that [FIRM_SUCCESS] appears in the FL displays.*[UNFORMAT] display means the unit is already updated to newestsame version. Then version up is not necessary.7 Transfer [9][9] in the service mode setting, and initialize the servicesettings (return various settings and error information to theirdefault values. The laser time is not included in this initialization).Make sure that [CLr S] appears in the FL display.After checking it, turn the power off.8 When replacing of RAM drive, transfer [9] [5] in the service modesetting to delete Laser used time.Make sure that [CLr 1] appears in the FL display.After that, turn power off.Item Contents Check Item Contents CheckPictureBlock noiseSoundDistorted soundCrosscut noise Noise (static, background noise, etc.)Dot noise The sound level is too low.Picture disruption The sound level is too high.Not bright enough The sound level changes.Too brightFlickering colorColor fading