Panasonic DMR-EX78EB Operating Instructions Manual

Contents

92RQT9078Troubleshooting GuidePlay fails to start even when[ PLAY] is pressed.Play starts but then stopsimmediately. Insert the disc correctly with the label facing up. 81 The disc is dirty. 81 You tried to play a blank disc or a disc that is unplayable on the unit. 15, 16,18 You tried to play a +RW that needs to be finalised on the equipment usedfor recording.− You may be able to copy a “One time only recording” title that wasrecorded to DVD-RAM using a different Panasonic DVD Recorder to thisunit’s HDD, but play is not possible due to copyright protection.− When recording to DVD-RAM using EP (8Hours) mode, play may not bepossible on DVD players that are compatible with DVD-RAM. In this caseuse EP (6Hours) mode.72 You cannot play discs during DV automatic recording. − If playing DivX VOD content, refer to the homepage where youpurchased it. (DivX)39 Make sure that the TV is turned on. If the menu or messages aredisplayed, follow the on-screen instructions.−Audio and video momentarilypause. This occurs between playlist chapters. − This occurs between chapters and with partially deleted titles on finalisedDVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RWthat have been copied using the high speed mode.− This occurs as scenes change during Quick View (Play 1.3). − [-R]DL] [+R]DL] When playing a title recorded on both layers, the unitautomatically switches between layers and plays the title in the same wayas a normal programme. However, video and audio may momentarily cutout when the unit is switching layers.15DVD-Video is not played.  Ensure the DVD-Video region number for the disc is correct, and the discis not defective. You have set a ratings level to limit DVD-Video play. Change this setting.Cover72Alternative soundtrack and subtitlescannot be selected. The languages are not recorded on the disc. − You may have to use the disc’s own menus to select languages and audiotracks.20No subtitles.  Subtitles are not recorded on the disc. − Set “Subtitle” in the Disc menu to “On”. 66Angle cannot be changed.  This function depends on software availability. Angles can only be changedduring scenes where different angles are recorded.−You have forgotten your ratingspassword. With the tray open, press [DRIVE SELECT] to select the DVD drive, thenpress and hold [ REC] and [/1.3] on the main unit simultaneously forabout 5 or more seconds.−Quick View (Play 1.3) does notwork. This does not work when audio is other than Dolby Digital. − This does not work while recording in XP or FR mode. −The resume play functiondoes not work. Memorized positions are cancelled when– press [] several times.– open the disc tray.– [SD] ([EX88])[CD] [VCD] [USB] turn off the power.– a recording or timer recording was executed.−The Video CD picture does notdisplay properly. When connecting to Multi-system TV, select “NTSC” in “TV System” in theSetup menu.75 When connecting to PAL TV, the lower part of the picture cannot bedisplayed correctly during search.−Time Slip, Manual Skip, etc. doesnot work. These functions do not work with finalised discs. − Time Slip does not work when the unit’s “TV System” settings are differentfrom the title recorded on the disc.75It takes time before play starts. This is normal on DivX video. (DivX) −Picture stops. Picture may stop if the DivX fi les are greater than 2 GB. (DivX) −Cannot see the beginning of thetitle played. (If connecting to a TV that supports VIERA Link with an HDMI cable)When [PLAY] is pressed on this unit’s remote control, you may not beable to see the beginning of the title played until the picture is displayed onthe TV. Using [], return to the beginning of the title.−Playback Issues Operation Page