Panasonic DMR-XW390 Operating Instructions Manual

Also see for Diga DMR-XW390: Operating instructions Operating instructions

Contents

PicturesVQT4C7250Copying pictures[SD] > [HDD]This unit saves information about importedpictures. Therefore, if pictures are imported fromthe same SD card, then only new pictures will becopied.[USB] > [HDD]All pictures in USB will be copied.1 While stoppedInsert the SD card or the USB memory.The menu screen appears. (> 31)2 Select “Copy Pictures ( JPEG )”, then press[OK].3 Select “Copy”, then press [OK].• [SD] Even if protection of the card is set,copy will start.• [USB] Copy will start.4 [SD]:Select “Copy & Delete” or “Copy Only”, thenpress [OK].If “Copy & Delete” is selected, copiedpictures in the SD card will be deleted aftercopying.To stop copyingPress and hold [RETURN ] for 3 seconds.• Pictures without shooting date will be categorised using thecreation date.• If the space on the destination drive runs out or the numberof files/folders to be copied exceeds the maximum (> 95),copying will stop partway through.• This unit saves the information on up to 12,000 picturesand 30 SD cards. If additional pictures are imported, theolder information will be deleted.[HDD] ,-. [RAM] [SD][SD] ,-. [RAM][USB] > [HDD] [RAM]1 While stoppedPress [FUNCTION MENU].2 Select “Copy (VIDEO / PICTURE)” in “Copy”,then press [OK].3 Set the copy direction.1 Select “Copy Direction”, then press[1] (right).2 Set “Source”.3 Set “Destination”.4 Press [2] to confirm.4 Set the copy mode.1 Select “Copy Mode”, then press[1] (right).2 Set “Format” to “PICTURE”.3 Press [2] to confirm.Copying automaticallyCopy added pictures ( JPEG ) by date.Copy CancelRETURNOKCopy from SD CARDCopy to HDDCopy New Pictures ( JPEG )Copying using the copying listCopySD CARDHDD123SourceDestinationCancel AllCopy DirectionCopy ModeCreate ListStart CopyingSD CARD  HDDPICTURE High SpeedSelect the copy direction.RETURN0Downloaded from www.Manualslib.com manuals search engine