Panasonic DMR-XW390 Operating Instructions Manual

Also see for Diga DMR-XW390: Operating instructions Operating instructions

Contents

Convenient functionsVQT4C72 77OthersStandby SettingsPower Save in Standby• On:It will go into the “Power Save in Standby”mode.• On Timer:“Power Save in Standby” is activated whenthe set time comes.• If the clock has not been set, “Power Savein Standby” is activated at all hours.• Off:It is possible to start quickly from thestandby mode. (Quick Start mode)• This function cannot be enabled when the DLNAfunction is enabled in “Named devices” or “Unnameddevices”. (> 76)Automatic StandbySet the time to turn the unit to standby modeautomatically.When the unit is not operating, the unit will beturned to standby mode once the set time haspassed.Automatic Standby after OTR• On:This unit is turned to standby mode when itis not operated for approximately 5 minutesafter completing “Automatic Stop” or“Recording Time” (> 23).Automatic Standby after Copy• On:This unit is turned to standby mode when itis not operated for approximately 5 minutesafter completing copy (> 40, Copyingtitles).Remote ControlChange the remote control code on the main unitand the remote control if you place otherPanasonic products close together.• Use “DVD 1”, the factory set code, undernormal circumstances.1 Select the code, then press [OK].2 While pressing [OK], press and hold thenumber button ([1] to [6]) for more than5 seconds.3 Press and hold [OK] for more than 5 seconds.4 Press [OK].• Operation is possible only with Panasonicremote controls with “IR6” printed at the bottomwhen the remote control code of this unit is setto “DVD 4”, “DVD 5” or “DVD 6”.BLU-RAY DISC RECORDER IR6DVD IR6IR6Downloaded from www.Manualslib.com manuals search engine