Panasonic DMR-XW390 Operating Instructions Manual

Also see for Diga DMR-XW390: Operating instructions Operating instructions

Contents

Getting startedVQT4C71 13Connection• Before connection, turn off all equipment and read the appropriate operating instructions.If the TV does not have the HDMI terminalConnect the TV with the Audio/Video cable. (> 14)About HDMI cable• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.• When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.• Recommended Panasonic HDMI cable part number:RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.• The HDMI connection supports VIERA Link “HDAVI Control” (> 62).• You cannot connect this unit to DVI devices that are incompatible with HDCP.Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audiocannot be output.)• If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be downmixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)Basic connectionsWhen the unit is not to be used for a long timeTo save power, unplug it from the household mains socket. This unit consumes a small amount ofpower, even when the unit is in standby mode.[approx. 1.1 W (“Power Save in Standby” is activated)]VHF/UHFRF INHDMI INTo the aerialTV’s rear panelAerial cableRF coaxial cable(supplied)This unit’s rear panelCooling fanHDMI cableAC mains lead(supplied)• Connect only after all otherconnections are complete.Household mains socket(AC 220 to 240 V, 50 Hz)Downloaded From Disc-Player.com Panasonic Manuals