Panasonic DMRBW880 Operating Instructions Manual

Also see for Diga DMR-BW880: Operating instructions Operating instructions Operating instructions

Contents

Getting startedVQT2J7019After completing “Easy setting”, you can continue with“Network Easy Settings”.Follow the on-screen instructions and makethe following settings.≥Network connection test≥Home Network (DLNA) function setting≥Internet connection testWhen TV picture appears, Setup is complete.∫ When you experience problems withsettings≥Network Easy Settings ( Connection Test )≥Network Easy Settings ( Internet Connection Test )To stop partwayPress [RETURN ].To restart Network Easy Settings1 While stoppedPress [FUNCTION MENU].2 Select “Setup” in “Others”, then press [OK].3 Select “Network Easy Settings” in “Network”, then press[OK].To redo settings individually1 While stoppedPress [FUNCTION MENU].2 Select “Setup” in “Others”, then press [OK].3 Select “Network Settings” in “Network”, then press [OK].4 Select “IP Address / DNS Settings” (> 81) or “ProxyServer Settings” (> 81), then press [OK].Check security before using Home Network (DLNA)functionIf you set “Home Network (DLNA) function” to “On”, allconnected devices on the same network can access thisunit. Ensure that the router for your home network hasadequate security system to prevent unauthorized access.≥Refer to the operating instructions of the hub or router.≥ Home Network (DLNA) function setting can be set only when youselected “Off” for “Power Save in Standby” in “Easy setting“. (> 18,step 3)≥ Even if you set “Home Network (DLNA) function” to “Off”, it is possible toset to “On” later. (> 67)Network Easy SettingsDisplay Check thefollowing1. LAN cableconnection: “Fail” ≥Connection ofthe LAN cables(> 13)2. IP addresssetting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection: “Pass” ≥Connection andsettings of thehub and router≥Settings of “IPAddress / DNSSettings” (> 81)2. IP addresssetting:“Fail” or “Homenetworkavailable”3. Connection togateway: “Fail”1. LAN cableconnection: “Pass”2. IP addresssetting: “Pass”3. Connection togateway: “Fail”OKRETURNNetwork Easy SettingsLAN setup and testing of home network andinternet connections are required for internetfunctions. Broadband Internet connection isnecessary for network features.Please confirm that a LAN cable is connected.Please refer to the operating instructions.Press OK to start Network Easy Settings.Display Check the followingCannot find theserver. (B019)≥Network connections andsettings≥Settings of “IP Address / DNSSettings” (> 81)No connection couldbe made to theserver. (B020)≥The server may be busy or theservice may have beensuspended. Please wait a fewmoments, and then try again.≥Settings of “Proxy ServerSettings” (> 81)