38Internet Fax FeaturesSetup (SMTP Mail Server/POP3 Client)To install your machine as SMTP Mail Server, the following network parameters need to be programmed on your networkand on your machine.• TCP/IP Address of your machine• TCP/IP Subnet Mask of your machine• TCP/IP Address of the Default Gateway• Host Name• TCP/IP Address of the DNS Server (if not available, see note 2)• Email Address of your machine (see note 1)• Name or IP Address of the Default SMTP mail server• SMTP Authentication Name (when the authentication with the SMTP server is required)• SMTP Authentication Password (when the authentication with the SMTP server is required)Email (from your machine to a PC) and Direct IFAX XMT TransmissionEmail (from a PC to your machine) and Direct IFAX XMT ReceptionNOTE 1. To function as SMTP mail server, your machine's email address must include its unique Hostname within your company domain. This unique Host name must be registered within yournetwork’s DNS (Domain Name System) server.Example: Internet_Fax@fax01.panasonic.com2. By default the machine requires the IP Address of the DNS Server and prompts you to enterthe SMTP Server Name.If the DNS Server is not available, change the (DNS server address) of General Settings to“No” ( , Input ID Code,). Then the machine will prompt you to enter the IP Address ofthe SMTP Server.ifaxuser@fax01.panasonic.comSMTP01.panasonic.com(SMTP Mail Server)POP02.panasonic.com(POP Server)Gateway(Router)popuser001@panasonic.comSMTPPOP3Direct IFAX XMTifaxuser@fax02.panasonic.comifaxuser@fax01.panasonic.comSMTP01.panasonic.com(SMTP Mail Server)Gateway(Router)popuser001@panasonic.comSMTPDirect IFAX XMTifaxuser@fax02.panasonic.comFUNCTION GENERAL SETTINGS Key Operator ModeOK DNS server address
