96DP-2310/3010APR 2003Ver. 1.004.2. Service Modes (For Facsimile)4.2.1. Fax Service Mode Procedure1. To select the Service ModeThe Service Mode is selected when “FUNCTION”, “ORIGINAL SIZE (LEDGER/A3)” Keys and Key “3”on the keypad are simultaneously pressed, then F1 will appear in the display.Press “9” and “START” keys to enter F9 Mode: Unit Maintenance.Select “00 FAX Service Mode” on the Touch Panel display to enter Facsimile Service Mode.2. To exit the Service ModeThe Service Mode is reset when the “FUNCTION” and “C (CLEAR)” keys are pressed simultaneously.4.2.2. FAX Service Mode TableThe following service modes are provided to assist you in setting operational functions of the unit anddetermining the condition of the unit.No. Service Mode Description00 Not Used01 Function Parameter Setting Allows changes to the function parameters (the homeposition, etc.).02 RAM Edit Mode Factory use only.03 Print Parameter List / Report Prints the Function Parameter List, Page Memory Test, PrinterReport, All Document File, Protocol Trace and Toner OrderForm.04 Modem Tests Generates various binary, tonal and DTMF signals, by themodem.05 Not Used06 RAM Initialize Initialize RAM and restore the default value of the functionparameters.07 Not Used08 Check & Call Allows input of information for Service Alert Report,Maintenance Alert Report and Toner Order Form.09 System Maintenance Used for Firmware Update, Firmware Backup, ParameterRestore, Parameter Backup, Transferring Firmware from thePC to the Flash Card and Sending a Received File during afatal printer error.