Panasonic DP-8016P Operating Instructions Manual

Also see for DP-8020E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

14Getting To Know Your MachineINVINV LTR LGL LDRLTRLDRINVLTRLGLINVLTRINVINV-RLTR-RLGLLDRWidth GuidesFace DownUntil it stopsUpper Limit GuidesUntil it stopsSheet BypassPUSHPaper TrayMax LevelIndicatorPaper Tray∗∗∗∗∗ Hold the guides by the center whenadjusting the widthOperation ChartIf set to otherfunction mode(DP-8020E/8020Ponly)Face UpABCFromADF/i-ADF(Option)FromPlaten Face Down● If the original is not positionedproperly, a portion of the originalmay not be copied.● For originals smaller than Invoicesize, position the original withinthe Invoice area and selectInvoice.or● Adding Paper (Paper Tray)The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.● Adding Paper (Sheet Bypass)Copying on Special Paper, etc.Load Paper: Face UpPaper Weight: 16 - 24 lb (60 - 90 g/m2 )Paper Capacity: 550 Sheets (20 lb (80 g/m2 ))Adjust the width guides.Incorrect adjustment may cause thepaper to wrinkle, misfed, or skew.Original Guides■ Quick Operation ChartNOTE:To change the paper size, refer topage 62.11 2 3Adding Paper Turn the PowerSwitch to theON positionOriginal Guides∗∗∗∗∗Adjust to theoriginal's widthTray(Max. 50 Lettersize originals)INV: Invoice, LTR: LetterLGL: Legal, LDR: Ledger44 Load Paper(Do not exceed limit guides)Paper Weight: 15-34 lb (55 - 133 g/m2 )Paper Capacity: 50 sheets/20 lb (80 g/m2)To add paper to the Sheet Bypass,remove the leftover paper from thetray, and align it with the additionalpaper, then load them together ontothe tray.NOTE:Load the paper properly, and ensurethat it does not exceed the Max. Levelindicator.21 2 3(ON)(OFF)