Panasonic DP-8016P Operating Instructions Manual

Also see for DP-8020E: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

55Function08 SPECIAL TRAY 2 Selects the paper tray to use for special paper. 1:NONE1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /5:TRAY-4 / 6:BYPASS(Only available when optional TRAY-2 and 3/4are installed. see page 69)09 KEY/TOUCH BEEP Selects the default key sound level. 2:SOFT1:OFF / 2:SOFT / 3:LOUD10 BYPASS SET BEEP Selects whether to sound a Beep when paper is 1:INVALIDset on the Sheet Bypass.1:INVALID / 2:VALID11 ORIG.SET BEEP ADF Selects whether to sound a Beep when paper is 2:VALIDplaced on the ADF.1:INVALID / 2:VALID12 PAPER OUT ROTATE Machine will automatically rotate the image to 1:OFFaccommodate the orientation of the paper in anotherTray and print when the selected Tray is empty.1:OFF / 2:ON13 DEPT. COUNTER MODE Monitors the copy usage of each department. Consult your1:TOTAL COUNTER authorized2:DEPT. COUNTER Panasonic dealer3:DEPARTMENT LIST16 LANGUAGE PRIORITY Selects whether to enable the language 1:OFFselection menu to display when the machinecomes out of the Energy Saver Mode, or whenthe RESET button is pressed once.1:OFF / 2:ON17 DATE & TIME Sets the date and time.(Month, Day, Year, Time)Input the date and time with Cursor Keys andKeypad.18 DAYLIGHT TIME Set Daylight Time according to your local 2: MAR 2ndregulation.1: OFF : Daylight Time is not applied2: MAR 2nd : From 2 a.m. on the 2nd Sundayof March to 2 a.m. on the 1stSunday of November• The date setting shown above reflects the NewRegulation starting in 2007. In 2006, the DaylightTime will end on the Last Sunday of October.3: APR 1st : From 2 a.m. on the 1st Sunday ofApril to 2 a.m. on the Last Sundayof October19 IP ADDRESS (DHCP)*1,*2 Displays the IP Address which was reserved byDHCP server.20 SUBNET MASK(DHCP)*1,*2 Displays the Subnet Mask Address which wasreserved by DHCP server.21 DEF. G/W IP(DHCP)*1,*2 Displays the Gateway IP Address which wasreserved by DHCP server.22 DHCP DEFAULT∗3 Selects whether to enable the DHCP. 2:VALID1:INVALID / 2:VALID■ General Settings (For Key Operator) (Continued)No. Modes Function InitialSettingNOTE ∗1 When setting other than DHCP server Network settings, Parameter No. 22 (DHCP DEFAULT) should be set to “INVALID”first, then setup Parameters No.19 to 21.∗2 When Parameters No. 19 to 23 (except 22) are set, cycle the power by turning the Power Switch on the Right Side of themachine OFF and ON.∗3 When not connecting to LAN, the setting of DHCP should be on INVALID. When the setting of DHCP is on VALID, and themachine is in Shutdown Mode, the machine will not answer an incoming Fax call.