Panasonic DP-C265 Operating Instructions Manual

Also see for Workio DP-C265: Operating instructions Operating instructions Operating instructions Scan/Email guide Operating instructions

Contents

18Chapter 2 General Settings60 - 79 61 SMB DeviceNameSet the device name for MicrosoftNetwork (SMB).There is no default value. When themachine starts up with “59 SMB” set to“On”, and “61 SMB Device Name” and “62SMB Workgroup Name” not set,“Panasonic DP-XXXX and the lower sixfigures of MAC Address” will beautomatically set up.Up to 15 characters62 SMB WorkgroupNameSet the working group name forMicrosoft Network (SMB).There is no default value. When themachine starts up with “59 SMB” set to“On”, and “61 SMB Device Name” and “62SMB Workgroup Name” not set, “DPCL-PRINTER” will be automatically set up.Up to 15 characters63 SMB Comment Set comments about the machineused for Microsoft Network (SMB).Up to 48 characters64 Bonjour Set the Bonjour.z When the optional Printer ControllerModule (for Adobe® PostScript ® 3™) isinstalled.There is no default value. When themachine starts up with “64 Bonjour” set to“On”, “Panasonic DP-XXXX and the lowersix figures of MAC Address” will beautomatically set up.Off, On Off65 Bonjour Name Set the name of Bonjour.z When the optional Printer ControllerModule (for Adobe PostScript 3) isinstalled.There is no default value. When themachine starts up with “64 Bonjour” set to“On”, “Panasonic DP-XXXX and the lowersix figures of MAC Address” will beautomatically set up.Up to 31 characters66 IPv6 Set this parameter to “On” when usingthe machine for IPv6.z For details about setting IPv6, refer to theDocument Management System (DeviceExplorer and Embedded Web Server) ofprovided CD-ROM.Off, On OffNo. 61 to 66After setting any of these parameters, turn themachine’s power switch Off, and then On again.Key Operator ModeNo. Parameter Comments Selective Item StandardSetting