Panasonic DP-C265 Operating Instructions Manual

Also see for Workio DP-C265: Operating instructions Operating instructions Operating instructions Scan/Email guide Operating instructions

Contents

54Chapter 4 Fax/Email Settings120 - 159 122 Dial Prefix Set the Dial Prefix number (up to4 digits).z When the machine detects a10-digit telephone number(excluding any characters suchas “-”) being dialled, it willautomatically append thepreset Dial Prefix number.z When the telephone number isless or more than 10-digit inlength, the Dial Prefix numberis not appended.z This feature is available incertain countries only.125 Confirm Stations Set whether to confirm thedestinations.When set to “Valid”, thedocument cannot be sent unlessthe destination is confirmed.z For details about the ConfirmStations function, refer toConfirming the Destination inthe Operating Instructions (ForFacsimile and Internet Fax) ofprovided CD-ROM.Invalid, Valid Invalid131 Job Tracking Set the Job Tracking under thefollowing conditions.z When “75 UserAuthentication” in the GeneralSettings is set to “On” (Copy,Fax, Scan, or Print) and “54Fax Forward” in the FaxParameters is set to “Invalid”.None, Tx (Send), Rx(Receive), Tx & Rx(Send & Receive)None132 Via Fax Server Set to “Valid” to enable theRightFax function.Invalid, Valid Invalid133 Job Build and SADF Mode Set “Yes” to use the Job Buildand SADF function.z This function is only availablewhen “05 Memory (HOME)” inFax/Email Settings > FaxParameters is set to “On”.z Function Parameter “82 QuickMemory XMT” (Fax/EmailSettings > Fax Parameters) isnot available for this function.z Up to 255 pages can be stored.When the number of pagesexceeds 255, the memorybecomes full.No, Yes NoFax Parametersz The contents of Fax Parameter may differ depending on the each country’s regulation or specification.No. Parameter Comments Selective Item StandardSetting