Panasonic DP-MC210 Quick Reference Manual

Also see for DP-MC210: Operating instructions Quick reference guide Operating instructions

Contents

Important Information4 Detailed operating instructions are on the CD-ROM.Operating safeguardsSD™ cardInstallation and relocationLaser radiationMake sure that the unit is installed in a wellventilated room so as not to increasedensity of ozone in the air. Since ozone isheavier than air, it is recommended that airat floor level be ventilated.Turn the power switch OFF before cleaning.Do not use liquid or aerosol cleaners.Do not cover slots and openings on the unit.They are provided for ventilation andprotection against overheating. Never placethe unit near radiators, or in a place whereproper ventilation is not provided.Never push any objects through slots in thisunit. This may result in the risk of fire orelectric shock. Never spill any liquid on theunit.To reduce the risk of electric shock, do notdisassemble this unit. Take the unit to anauthorized service center when service isrequired. Opening or removing covers mayexpose you to dangerous voltage or otherrisks. Incorrect reassembly can causeelectric shock when the unit is subsequentlyused.Follow all warnings and instructions markedon this unit.Do not spill liquids (detergents, cleansers,etc.) onto the telephone line cord plug, orallow it to become wet at all. This may causea fire. If the telephone line cord plugbecomes wet, immediately pull it from thetelephone wall jack, and do not use.Unplug this unit from power outlets and referservicing to an authorized service centerwhen any of the following conditions occur:L If the power cord is damaged or frayed.L If liquid has been spilled into the unit.L If the unit has been exposed to rain orwater.L If the unit does not work normally byfollowing the operating instructions.Adjust only controls covered by theoperating instructions. Improperadjustment may require extensive workby an authorized service center.L If the unit has been dropped orphysically damaged.L If the unit exhibits a distinct change inperformance.Do not place SD cards within reach ofchildren. If a child swallows an SD card,seek immediate medical treatment.After moving the unit from cold areas towarmer areas, wait approximately 30minutes before turning on the power switchto allow the unit to adjust to the ambienttemperature. If the power switch is turned ontoo soon after a sudden climate change,condensation may form inside the unit,causing malfunction.Never turn the unit upside down or sidewayswhen moving it.Never install telephone wiring during alightning storm.Never install telephone jacks in wetlocations unless the jack is specificallydesigned for wet locations.Never touch uninsulated telephone wires orterminals unless the telephone line hasbeen disconnected at the network interface.Use caution when installing or modifyingtelephone lines.Do not position the unit in a location where itis unstable or subject to vibrations.The printer of this unit utilizes a laser. Use ofcontrols or adjustments or performance ofprocedures other than those specifiedherein may result in hazardous radiationexposure.