Panasonic DVC20 Operating Instructions Manual

Also see for AGDVC20P - 3 CCD DV CAMCORDER: Operating instructions Operating instructions

Panasonic DVC20 Operating Instructions Manual Manual pdf 28 page image

Edit mode28Using the DV Cable for Recording(Digital Dubbing)By connecting other digital video equipment with DV terminaland the camera-recorder by using the DV cable (optional) 1,high-image-quality dubbing can be done in digital format.≥Set to Tape Playback Mode. (Player/recorder)1 Connect the camera-recorder and digital videoequipment with the DV cable.2 Set [ADVANCE] >> [REC STDBY] >> [YES]. (Recorder)≥You do not have to follow this step when the remote control isused in the digital dubbing.3 Start playback. (Player)4 Start recording. (Recorder)Press the [3] button to select [¥/;] icon.≥Or, without operating step 2While pressing the [¥REC] button on the remote control,press the [1] button.5 Press the [3] button to select the [¥/;] icon again orpress the [;] button on the remote control to stoprecording. (Recorder)6 Stop playback. (Player)ª To cancel the standby for recordingWhen the camera-recorder is standby for recording, press the[4] button and select the [∫] icon.≥Do not plug or unplug the DV cable during dubbing, or thedubbing may not be completed properly.≥If a picture (bilingual video, etc.) containing main sound andsub sound has been dubbed, select the desired sound by[SETUP] >> [AUDIO OUT] on playback.≥Even if you use a device equipped with DV terminals such asIEEE1394, you may not be able to perform digital dubbing insome cases. For more information, see the instructions forequipment connected.≥Regardless of the menu settings on the recorder, digitaldubbing is carried out in the same mode as the [AUDIO REC]mode of the playback tape.≥The images on the recorder monitor may be disturbed, but itdoes not affect the recorded images.≥If a picture containing a copyright protection signal (copyguard) is recorded by the camera-recorder, the picture isdistorted by mosaic-like patterns at playback.≥When wide images are input, the display such as the menuscreen or the operation icon is expanded horizontally.≥While pictures are input from the DV terminal, the operationicon blinks on instead of appearing from the side of the screenwhen you press the [ENTER] button.1DVDVSTOPV/REWSTILL ADV VOL¥REC A.DUBPLAYPAUSEFF/WSTILL ADVTWDVC20_Eng.book 28 ページ２００５年１０月３１日月曜日午前１０時３６分