Panasonic DVC20 Operating Instructions Manual

Also see for AGDVC20P - 3 CCD DV CAMCORDER: Operating instructions Operating instructions

Panasonic DVC20 Operating Instructions Manual Manual pdf 32 page image

Others32OthersIndicationsVarious functions and the camera-recorder status are shown onthe screen.Basic indications: Remaining battery power0h00m00s00f: Time code3:30:45PM: Date/Time indicationRecording indicationsR0:45: Remaining tape time≥Remaining tape time is indicated in minutes. (When it reachesless than 3 minutes, the indication starts flashing.)SP: Standard Play mode(Recording speed mode) -18-LP: Long Play mode(Recording speed mode) -18-¥: Recording -18-; (Green): Recording pause -18-; (Green flash): Standby mode; (Red): Fade out: Recording check -18-: Cinema mode -22-: Digital zoom -19-: Automatic mode -17-: Manual mode -22-, -23-, -24-MF: Manual focus -24-5k: Zoom magnification indication -19-: Backlight mode -20-: Image stabilizer -22-1/500: Shutter speed -24-F2.4: F number -24-6dB: Gain value -24-: Soft skin mode -21-: Tele macro -21-: Fade (White) -21-: Fade (Black) -21-: Color night view function -20-: 0 Lux night view function -20-: Zoom microphone -19-: Microphone sensitivity level -19-: Wind noise reduction -21-5: Sports mode (Scene mode) -22-: Portrait mode (Scene mode) -22-: Low light mode (Scene mode) -22-: Spotlight mode (Scene mode) -22-: Surf & snow mode (Scene mode) -22-: Auto white balance -23-: Indoor mode (recording underincandescent lamp) -23-: Outdoor mode -23-: White balance adjustment mode -23-Playback indications¥: Recording underway1: Playback -25-;: Pause -25-5: Fast-forward/Cue playback -25-6: Rewind/Review playback -25-D/E: Slow motion playback -25-;1/2;: Frame-by-frame playback -25-2k5: Variable-speed search -26-: Repeat playback -25-A.DUB ¥: Audio dubbing -29-A.DUB ;: Audio dubbing pause -29-: Blank search -18-12bit, 16bit: Audio recording mode -31-: Volume adjustment -25-Warning/alarm indicationsIf any one of the following indications lights up or flashes,please check the camera-recorder.Confirmatory indicationsY: A cassette with the accidental erasure prevention sliderplaced in the [SAVE] position is inserted.No cassette is inserted.[--]/0:The built-in battery is low. -14-°: The warning/alarm indication appears when you recordyourself. Turn the LCD monitor towards the viewfinderand check the warning/alarm indication.REMOTE:An incorrect remote control mode has been selected. -16-2END:The tape came to the end during recording.:: The video heads are dirty. -35-Textual indications3DEW DETECT/3EJECT TAPE:Condensation has occurred. Take out the cassette andwait for a while. It takes some time until the cassetteholder opens, but this is not a malfunction. -35-LOW BATTERY:The battery is low. Recharge it. -9-NO TAPE:No tape is inserted. -11-TAPE END:The tape came to the end during recording.CHECK REC TAB:You are attempting to record pictures on a tape with theaccidental erasure prevention slider placed in the [SAVE]position.You are attempting audio dubbing or digital dubbing on atape with the accidental erasure prevention slider placedin the [SAVE] position.CHECK REMOTE MODE:An incorrect remote control mode has been selected. Thisis only displayed at the first operation of the remotecontrol after powering-on. -16-WRONG TAPE FORMAT:You are attempting to play back a tape section that hasbeen recorded with a different TV system. This cassette isincompatible.UNABLE TO A.DUB (LP RECORDED):Audio dubbing cannot be performed because the originalrecording was in LP mode.UNABLE TO A.DUB:You are attempting to perform audio dubbing on anon-recorded tape.COPY PROTECTED:Images cannot be recorded correctly because themedium is protected by a copy guard.NEED HEAD CLEANING:The video heads are dirty. -35-PUSH THE RESET SWITCH:An irregularity in the equipment has been detected. Pressthe reset button (-7-). This may solve the problem.CHANGE TO MANUAL MODE:You are attempting to select the item on the[SCENE MODE] when the [AUTO/MANUAL/FOCUS]switch is set to [AUTO].REVERSE THE LCD MONITOR:At the time of 0 Lux night view mode, when LCD monitoris not reversed, it displays. When the LCD monitor isrotated by 180° towards the lens, the brightness of theLCD monitor cannot be adjusted.CINEMAAUTOMNLEIS0LuxZOOMAWBDVC20_Eng.book 32 ページ２００５年１０月３１日月曜日午前１０時３６分