Panasonic DVD-F87 Operating Instructions Manual

Also see for DVD-F84: Operating instructions Operating instructions

Contents

RQT729212Changing the player settings≥ The settings remain intact even if you switch the unit to standby.≥ Underlined items are the factory preset.∫ “Disc” tab∫ “Video” tab∫ “Audio” tab1 2 3 4 5Shows Setup menu. Select the tab. Select the item. Make the settings. Press to exit.SETUPENTERSelectGo rightENTERRegisterENTER1 2 34 5 67 8 90 10RegisterSETUPThe QUICK SETUP enables successive settings of the items in theshaded area.AudioChoose the audio language.≥ English ≥ (Language options)§1 ≥ Original§2 ≥ Other¢¢¢¢§3SubtitleChoose the subtitle language.≥ Automatic§4 ≥ English ≥ (Language options)§1 ≥ Other¢¢¢¢§3MenusChoose the language for disc menus.≥ English ≥ (Language options)§1 ≥ Other¢¢¢¢§3≥ Changing the menu language from QUICK SETUP also changes this setting.RatingsSet a ratings level to limit DVD-Video play.≥ Follow the on-screen instructions.Setting ratings (When level 8 is selected)≥ 8 No Limit ≥ 1 to 7 ≥ 0 Lock All: To prevent play of discs without ratings levels.Changing ratings (When level 0–7 is selected)≥ Unlock Player ≥ Change Password ≥ Change Level ≥ Temporary Unlock.TV AspectChoose the setting to suit your televisionand preference.≥ 4:3 Pan&Scan: Regular aspect television (4:3)The sides of the widescreen picture are cut off so it fills the screen (unlessprohibited by the disc).≥ 4:3 Letterbox: Regular aspect television (4:3)Widescreen picture is shown in the letterbox style.≥ 16:9: Widescreen television (16:9)[DVD-F87]only]\Progressive Out (Component)≥ Disable: Interlace output≥ Enable§5 or ≥ Enable§6 §7 (NTSC Disc Only): Progressive outputTV TypeSelect to suit the type of television.≥ Standard (Direct View TV) ≥ CRT Projector ≥ LCD TV/Projector≥ Projection TV ≥ Plasma TVTime DelayWhen connected with an AV amplifier andPlasma display, adjust if you notice theaudio is out of sync with the video.≥ 0 ms ≥ 20 ms ≥ 40 ms ≥ 60 ms ≥ 80 ms ≥ 100 msStill ModeSpecify the type of picture shown whenpaused.≥ Automatic≥ Field: The picture is not blurred, but picture quality is lower.≥ Frame: Overall quality is high, but the picture may appear blurred.Black Level Control§5Change the black level of the picture if youconnected a television through theCOMPONENT VIDEO OUT terminals.≥ Lighter: When connected through VIDEO OUT or S VIDEO OUT.≥ Darker: When connected through COMPONENT VIDEO OUT.NTSC Disc Output§6§7Choose PAL 60 or NTSC output when playingNTSC discs.≥ PAL60: When connected to a PAL television≥ NTSC: When connected to an NTSC television ([Asia]: “NTSC” is the factory preset.)PCM Digital OutputCheck the digital input limitations of theequipment you connect using COAXIALterminal and select the maximum samplingfrequency of PCM digital output.Off: When not connected digitallyUp to 48 kHz: When connected to equipment compatible with 44.1 or 48 kHzUp to 96 kHz: When connected to equipment compatible with 88.2 or 96 kHzUp to 192 kHz: When connected to equipment compatible with 176.4 or 192 kHz≥Signals that exceed the set maximum frequency and signals from copy-protected discs are converted to 48 or 44.1 kHz.≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz.Read your equipment’s operating instructions for details.Dolby Digital ≥ Bitstream ≥ PCM Select “Bitstream” when the equipment can decode the bitstream (digitalform of multi-channel data). Otherwise, select “PCM”.≥ If the bitstream is output to the equipment without a decoder, high levelsof noise can be output and may damage your speakers and hearing.DTS Digital Surround ≥ PCM ≥ BitstreamMPEG§7 ≥ PCM ≥ BitstreamDynamic Range Compression ≥ Off≥ On: Adjusts for clarity even when the volume is low through compressing the range of the lowestsound level and the highest sound level. Convenient for late night viewing. (Only works withDolby Digital)Audio during Search ≥ On ≥ Off[DVD-F87]only]Speaker SettingChoose the settings to suit your audiosystem and the listening environment(➜ page 13, Changing the speaker settingto suit your speakers).≥ Multi-channel:when 3 or more speakers are connected.≥ 2-channel:when 2 speakers are connected.If you select Multi-channel≥Speaker presence and size≥Delay time ≥Channel balanceChanging the player settingsSelect SelectDownloaded From Disc-Player.com Panasonic Manuals