Panasonic DVD-LX110 Operating Instructions Manual

Also see for DVDLX110 - PORTABLE DVD PLAYER: Operating instructions Operating instructions

35RQT8234(Continued on the next page)The on-screen menu shows “2” as asoundtrack option when [AUDIO] is pressed,but the audio does not change. [DVD-A]≥ This is normal on DVD-Audio. Even if a secondsoundtrack isn’t recorded, two numbers willnormally be shown.Play restarts from the beginning of the trackwhen soundtrack is changed. [DVD-A]≥ This is normal on tracks with still pictures or audio-only tracks.Subtitle position is wrong. ≥ Adjust the position. (“Subtitle Position” in Display Menu) (25)No subtitles. ≥ Display the subtitles. (17)In A-B repeat, point B isautomatically set.≥ If you have set only the starting point (point A), the end of an itembecomes point B when it is reached.Play doesn’t start. ≥ This unit may not play WMA and MPEG4 that contains still picture data.≥ If playing DivX VOD content, refer to the homepage where youpurchased the DivX VOD content. (Example: www.divx.com/vod)≥ If a disc contains CD-DA and other formats, proper playback may not be possible.Picture distorted. ≥ There may be some video distortion during search, but this is normal.≥ Picture quality may worsen or some frames may be skipped whenviewing [MPEG4] or [SD[VIDEO], but this is normal.≥ [DivX] Change “Source Select” in Picture Menu. (25)Picture stops. ≥ Picture may stop if the DivX files are greater than 2 GB.No picture on the LCD. ≥ Check connections. (6)≥ Select a monitor mode other than “OFF” (No picture). (14, Selectinghow to show 4:3 aspect pictures on the LCD).The LCD is dark. ≥ Adjust the brightness. (14)LCD pixels turn black orradiate different colors.≥ The LCD is constructed with precision technology so 99.99 % of the pixelsare active, but of the remaining of 0.01 %, there are pixels that may be blackor emit light constantly. This phenomenon is not a malfunction.Picture doesn’t appear onthe television (or the sizeof the picture seemswrong).≥ Check connections. (31)≥ Check that the television is on.≥ Check that the input mode on the television is correct.≥ Check the settings in “Video—TV Aspect”. (26)≥ Turn off the zooming feature on your television if you are using Zoom. (25)≥ Ensure that the unit is connected directly to the television, and is notconnected through a video cassette recorder. (31)≥ Use the television to change the aspect.≥ Adjust “Just Fit Zoom” in Display Menu. (25)Menu not displayedcorrectly.≥ Restore the zoom ratio to a1.00. (25)≥ Set “Subtitle Position” in Display Menu to “0”. (25)Auto zoom function doesnot work well.≥ Turn off the zooming feature on your television.≥ Use the other preset aspect ratios or manual adjustment. (25)≥ Zoom function may not work well, especially in dark scenes and maynot work depending on the type of disc or card.No sound from the unit’sspeakers. ≥ The speaker is off if the LCD is closed or headphones are connected.≥ Turn up the volume. (10, 12)Sound distorted. ≥ Select “Off” in “Advanced Surround”. (16)≥ Move unit away from mobile phones.≥ Noise may occur when playing WMA or MPEG4 files.≥ The disc may have restrictions on the method of audio output. Withsome multi-channel discs, audio will not be output properly. Refer tothe disc’s jacket for more information. [DVD-A]Piercing noise comesfrom the speakers.≥ If you have connected a digital amplifier which does not includedecoder, be sure to select “PCM” in “Dolby Digital”, “DTS DigitalSurround” or “MPEG” in “Audio” tab. (27)Specific operation impossible or incorrectPicture incorrectSound incorrectTroubleshooting guide