22VQT8645Other play modes VCD CDWhile stoppedPress [PLAY MODE] to select pro-gram or random play.If “$” appears on the television, press [∫]to clear “1” on the unit’s display, thenpress [PLAY MODE].The mode changes each time you pressthe button.[)A To play a maximum of 32 tracks in al A programmed order (Program play)llllllll ;l B To play tracks randomlyl A (Random play)llllllll ;{-------- Normal play modeSelect the screen for mode then follow theprocedures in the next column to start play.∫ When play finishesThe disc stops and the screen correspond-ing to the play mode reappears.∫ To restore normal playWhile stopped1. Press [∫] to clear “1” on the unit’sdisplay.2. Press [PLAY MODE] to select normalplay.3. Press [1].ªA Program play1 Press [ENTER].2 Use the cursor jockey [3, 4] toselect a track and press[ENTER].Each time you use the cursor jockey[3, 4],1()2, - - - - - .All^----------------------------JRepeat steps 1 and 2 to program othertracks.≥Instead of performing steps 1 and 2above, you can also use the numeric but-tons to highlight a track.≥“Total time” tells you the total time of theprogrammed tracks.≥After you select “All”, you can then clearunneeded tracks (á see below).3 Press [1].≥The contents of the program are saved in mem-ory until the unit is turned off or the disc lid isopened.To change the programWhile stopped1. Press [∫] to re-turn the programscreen.2. Use the cursor jockey [3, 4] to highlight thetrack and repeat “Program play” steps 1and 2.≥To clear tracks from the program≥1. Use the cursor jockey [3, 4, 2, 1] to high-light a track.≥2. Press [CANCEL].≥1. ≥Instead of pressing [CANCEL], you canselect “Clear” and press [ENTER].≥To erase the whole program≥Use the cursor jockey [3, 4, 2, 1] to high-light “Clear all” and press [ENTER].ªB Random playPress [1].Random PlaybackPress PLAY to start