Panasonic DVD-PV55 Operating Instructions Manual

Also see for DVD-PV55: Operating instructions Service manual Operating instructions

35VQT8645For Your Reference35Connecting other equipment∫ You can connect this unit to the following types of equipment to enhance your ex-perience. Refer to the relevant pages for connection. Initial settings that need to bechanged are indicated in inverted commas (“ ”).What you want to doEnjoy surroundsound with 3 or morespeakersConnect 2 speakersto enjoy stereoRecord to a cassetteor MD deckUsing headphonesHow to accomplish itUse the unit’s built-indecoder and connect toan amplifier.Connect digitally and usethe decoder in anotherpiece of equipment.Connect to a mini-systemor amplifier (includingDolby Pro Logicamplifiers).Connect digitally to amini-system or amplifier.Analogue recordingDigital recordingDigital connectionAnalogue connectionDigital connectionAnalogue connectionInitial settings“7 Speaker Setting”“6 Digital Audio Output”“7 Speaker Setting”“6 Digital Audio Output”“7 Speaker Setting”“6 Digital Audio Output”Referencepage36373838393939NoteEnsure “Dolby Digital”, “DTS Digital Surround” and “MPEG” are set to “PCM” if you connectthis unit to a digital amplifier without a decoder (á page 42). If the signals are output as bit-stream, “noise” will be output which can cause harm to your ears and speakers and the sig-nal will not be correctly recorded onto MDs.Preparations≥Ensure that this unit and other equipment to be connected are set to the standby mode orare off, and disconnect the AC mains lead, before commencing connection.≥Read through the instructions before connecting other equipment.