Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual

Also see for DVD Palmcoder VDR-D250: Operating instructions Operating instructions

Panasonic DVD Palmcoder VDR-D250 Operating Instructions Manual Manual pdf 148 page image

IndicationsThe SD card is full so no further data can be recorded. DeleteCARD FULL. unnecessary files(4 94)or inserta new SD card.PUSH THE RESET An irregularity in the unit has been detected. Press the RESETSWITCH. button to restart the unit. (4 155)CHANGE TO MANUALMODE. You are attempting to use a function that cannot be usedCANCEL MAGICPIX MODE. simultaneously.TURN OFF POWER LCD.With DVD-RW (Video format) and DVD-R, if the number ofdates displayed becomes 99 when [PLAY MODE] is set toCANNOT SET. [BY DATE], you cannot change the aspect setting from 16:9 to4:3 and vice versa.CHANGE MODE TO USEUSB. The USB cable is connected in the recording mode.DISCONNECTUSBYou are attempting to turn the mode dial with the USB cableconnected to the unit.The unit's power cannot be turned off when the unit isconnected to the computer.The unit cannot correctly establish the connection to thecomputer or printer. Disconnect and then reconnect the USBcable or check the [USB FUNCTION] setting on this unit.It is possible that the system cannot complete writing of a file normally when, for example, power isturned off for some reason during recording or editing.If faulty management information is found when a disc is accessed, the following message mayappear. Be sure to follow the messages. (Repairing may take time depending on the error.)I DISC ERROR HAS OCCURRED. REPAIR DISC NOW? II I• When you repair the disc, use a battery withsufficient battery power or the AC adaptor.• Depending on the condition of the data, it may notbe possibIe to compIeteIy repair the dataO • If the disc is removed without it being repaired, youwitl no longer be abIe to playback the scenesrecorded before the power went off• Do not repair a disc that has been recorded onanother device. This may cause the loss of data orthe disc148LSQT1011