10 Service Precautions10.1. Initializing the DVD PlayerInitialize the DVD player whenever you replace a microprocessor, microprocessor peripheral parts, module P.C.B. or mother P.C.B.10.1.1. PrecautionsThe customer settings will return to factory preset settings when the player is initialized. Make a note of the settings and reset themafter initializing.· When resetting, see the Initial Settings in the Operating Instructions.10.1.2. Initialization MethodThe player will be initialized (return to the factory preset condition) when you press the "PAUSE," "SKIP/SEARCH<<" and"OPEN/CLOSE" buttons simultaneously. When the DVD player is initialized, "Initialized" appears on screen, it also displays"INITIALIZE".Press them at the least for three seconds after you confirmed the display.10.2. Handling After Completing RepairsUse the following procedure to secure the traverse unit in the standby position.10.2.1. MethodConfirm that the power is turned on:1. Press the "OPEN/CLOSE" button to close the tray.2. Press the "POWER" button to turn off the power.3. Disconnect the power plug from the outlet.10.2.2. PrecautionsDo not disconnect the power plug from the outlet with the tray still open, then close the tray manually. If you were to do so, thetraverse unit would not go to the upper (standby) position, and the player could not be transported.17DVD-RV60
