7 Service Tools and Equipment7.1. Service Tools and Equipment TableApplication Name NumberGeneral DVD test disc DVDT-S15 or DVDT-S01Tilt adjustment Hex wrench JGS0100Adjustment table VFK0539Inspection Extension cable (power supply P.C.B. to mother P.C.B.) JGS0099Extension cable (mechanism loading P.C.B. to mother P.C.B.) VUC8027Extension cables (module P.C.B. to mother P.C.B.) JGS0116, JGS0098Others Screw lock RZZ0L01Grease JGS0091JGS0092Lubricant JZS0648Grease JGS0101Confirmation CD test disc SZZP1054CVCD test disc PVCD_K06Electrical adjustment OscilloscopeProbeAV cable VJA0658TV monitorGeneral General tools (Screw driver. etc)Static electricity countermeasures Soldering iron (with ESD countermeasure)Anti-static wrist strapConductive material (conductive sheet)7.2. Storing and Handling Test Discs· Surface precision is vital for DVD test discs. Be sure to store and handle them carefully.1. Do not place discs directly onto the workbench, etc., after use.2. Handle discs carefully in order to maintain their flatness.Place them into their case after use and store them vertically. Store discs in a cool place where they are not exposed todirect sunlight or air from air conditioners.3. Accurate adjustment will not be possible if the disc is warped from being placed on a surface made of glass, etc. If thishappens, use a new test disc to make optical adjustments.4. If adjustment is done using a warped disc, the adjustment will be incorrect and some discs will not be playable.9DVD-RV60