113LSQT1145With a computer (VDR-D310/VDR-D230)8 Select the scenes to be added tothe DVD-Video and then click[DVD List].9 Select the DVD menu, the discsize and the picture quality andthen click [OK].A new list is created in [DVD List] in [Source].≥ You can add images to the disc to be createdby dragging and dropping files from the libraryto the created list.10 Prepare a DVD-RW/DVD-R/rRW/rR drive that can be written toand then insert a brand-new discinto the drive.11 Click the list created in step 9 in[Source] to display the contentsof the list and then click [Write].≥ Check that the size of the data is not more thanthe capacity of the disc to be written to.12 Proceed with the write settingand then click [Create].Writing to the disc starts.≥ Depending on the amount of data, writing tothe disc may take time.≥ When the unit is connected to a computer,its power cannot be turned off.In this case, disconnect the USB cable(l 113).≥ If the unit is connected to a computer when theUSB function is set to [PC CONNECT(DISC)],no image will appear on the LCD monitor or theviewfinder.≥ When this unit is connected to a computer, youcannot use this unit’s DISC EJECT lever toremove a disc. Use the software’s eject buttonto eject the disc.≥ When a computer is accessing a disc in thisunit, the ACCESS/PC lamp lights. Do notdisconnect the USB cable or AC adaptor whilethe disc is being accessed as it may damagethe data.When the drive icon is displayed on the desktop:Drag the icon into the Trash andthen disconnect the USB cable.When the drive icon is not displayed on thedesktop:Exit the application and thendisconnect the USB cable.To disconnect USB cablesafely
