43LSQT1145Setup≥ The date and time function are driven by abuilt-in lithium battery.≥ Make sure to check the time before recording.≥ If the time display becomes [- -], the built-inlithium battery has run down. Use the followingsteps to charge the battery. When you turn onthe power for the first time after charging, amessage asking you to set the date and timewill appear. Select [YES] and set the date andtime.To recharge the built-in lithium batteryConnect the AC adaptor or attach the batteryto the unit, and the built-in lithium battery willbe recharged. Leave the unit as it is for approx.24 hours and the battery will save the date andtime for approx. 6 months. (Even if the OFF/ON switch is set to OFF, the battery is stillbeing recharged.)Adjusting LCD monitor/viewfinder1 Press the MENU button, thenselect [SETUP] # [LCD SET] or[EVF SET] # [YES] and press thejoystick.2 Move the joystick up or down toselect the item to be adjusted.Then, move the joystick left orright to make the adjustment.The bar display moves.∫ [LCD SET][BRIGHTNESS]:Brightness of the LCD monitor[COLOR]:Color level of the LCD monitor∫ [EVF SET][BRIGHTNESS]:Brightness of the viewfinder≥ To adjust the brightness of the viewfinder,extend the viewfinder and close the LCDmonitor to activate the viewfinder.≥ When the LCD monitor is rotated by 180°towards the lens, the brightness and color levelof the LCD monitor cannot be adjusted.≥ These settings will not affect the imagesactually recorded.Adjust the focus by sliding theeyepiece corrector knob.Adjusting the brightness andcolor levelMENUAdjusting the field of view0h00m00s0h00m00s0h00m00s0h00m00s
