Getting startedVQT2J6919After completing “Easy setting”, you can continue to perform“Network Easy Settings”.Follow the on-screen instructions and makethe settings.∫ When you experience problems withsettings≥Network Easy Settings ( Connection Test )≥Network Easy Settings ( Internet Connection Test )When television picture appears, set up is complete.To stop partwayPress [RETURN ].To restart Network Easy Settings1 While stoppedPress [SETUP].2 Select “Network Easy Settings” in “Network”, then press[OK].To redo settings individually1 While stoppedPress [SETUP].2 Select “Network Settings” in “Network”, then press [OK].3 Select “IP Address / DNS Settings” (> 81) or “ProxyServer Settings” (> 81), then press [OK].≥ Refer to the operating instructions of the hub or router.Network Easy SettingsDisplay Check thefollowing1. LAN cableconnection: “Fail” ≥Connection ofthe LAN cables(> 13)2. IP addresssetting: “Fail”3. Connection togateway: “Fail”1. LAN cableconnection: “Pass” ≥Connection andsettings of thehub and router≥Settings of “IPAddress / DNSSettings” (> 81)2. IP addresssetting:“Fail” or “Homenetworkavailable”3. Connection togateway: “Fail”1. LAN cableconnection: “Pass”2. IP addresssetting: “Pass”3. Connection togateway: “Fail”OKRETURNNetwork Easy SettingsLAN setup and testing of home network andinternet connections are required for internetfunctions. Broadband Internet connection isnecessary for network features.Please confirm that a LAN cable is connected.Please refer to the operating instructions.Press OK to start Network Easy Settings.Display Check the followingCannot find theserver. (B019)≥Network connections andsettings≥Settings of “IP Address / DNSSettings” (> 81)No connection couldbe made to theserver. (B020)≥The server may be busy or theservice may have beensuspended. Please wait a fewmoments, and then try again.≥Settings of “Proxy ServerSettings” (> 81)