With Other EquipmentVQT2J6961Recording disc: [HDD]Recording mode: XP, SP, LP, EP1 While stoppedPress [INPUT SELECT] to select the inputchannel.e.g., If you have connected to AV2 input terminals, select“AV2”.2 Press [REC MODE] to select the recordingmode.3 Start play on the connected equipment.4 Press [¥ REC].To skip unwanted partsPress [;] to pause recording. (Press again to restartrecording.)To stop recordingPress [∫].Recording disc: [HDD] [BD-RE] [BD-R] [RAM] [-R] [-RW‹V›] [+R][+RW]Recording mode: XP, SP, LP, EP1 Turn off this unit and DV equipment.2 Connect the equipment with the unit’s DVinput terminal (> 60).3 Turn on this unit.4 Turn on the DV equipment, and pause playat the point you want recording to start.5 Select “Rec to HDD” or “Rec to Blu-rayDisc / DVD”, then press [OK].6 Press [REC MODE] to select the recordingmode.7 Select “Start”, then press [OK].To stop recordingPress [∫].≥ It is not possible to operate the unit from DV equipment.≥ The DV input cannot be connected to a computer, etc.≥ The DV equipment name may not be shown correctly.Recording disc: [BD-RE] [BD-R] [RAM] [-R] [-RW‹V›] [+R] [+RW]Recording mode: FR1 While stoppedPress [INPUT SELECT] to select the inputchannel.e.g., If you have connected to AV2 input terminals, select“AV2”.2 While stoppedPress [FUNCTION MENU].3 Select “Others”, then press [OK].4 Select “Flexible Recording via AV input”,then press [OK].5 Select “Hour” and “Min.” and set therecording time.6 Start play on the other equipment.7 Select “Start”, then press [OK].To stop recording partwayPress [∫].To show the remaining timePress [STATUS ].Manual recordingDV Automatic RecordingDV Automatic RecordingRec to Blu-ray Disc / DVDRec to HDDRecord from the DV unit.Whitch do you want to record to?OKRETURNIf the DV automatic recording function does not workproperly, check the connections and settings, and turn theunit off and back on.If that does not work, follow the instructions formanual recording (> left).Flexible Recording via AV inputRETURNOKFlexible Recording via AV inputPlease set recording time. Record in FR mode.Maximum recording timeSet recording timeHour8 Min.00 Start Cancel8 hour 00 min.