Panasonic Diga DMR-BW850 Operating Instructions Manual

Also see for DIGA DMR-BW850: Operating instructions

Contents

Panasonic Diga DMR-BW850 Operating Instructions Manual Manual pdf 18 page image

18RQT9433STEP 2 Channel reception settings and TV aspect settingsTIME SLIPDISPLAYSTATUSAUDIOTEXTREC MODERECCREATECHAPTERFUNCTIONMENUDIRECTNAVIGATORGUIDERETURNPAUSESTOPSLOW/SEARCHCHPAGESELECTINPUTCHAVTVDRIVESELECTVOLDELPROG/CHECKEXITOKOPTIONSTTLMANUAL SKIPSKIPPLAY/x1.30987654321 abc defjklghi mnotuvqrsp xyzwRETURN23, 41 Turn on the television and select theappropriate AV input to suit theconnections to this unit.2 Press [^] to turn the unit on.When the Download from TV screen appears (➡ right)Auto Tuning setting screen appears.y Auto Tuning starts.The unit will search for the terrestrial digital channels. TVchannels will be located and stored ready for use.This takes 3 minutes.ScanAuto Tuning-Digital (DVB)9621RETURNThis will take about 3 minutes.CH Channel NameSearchingFree TV: 2 Pay TV: 0 Radio: 0 Data: 012DVBDVB1010Type QualityTV ONETV 2Auto Tuning is complete when Power Save setting screenappears.The time information can be obtained.3 Press [e, r] to select “On” or “Off”and press [OK].OKRETURNPower SaveOnOffOn: Minimises standby power consumption,disables Quick Start function. Unit’s Displayis set to “Automatic”.Off: Enables Quick Start function.y On:It will go into the Power Save mode when the power isturned off.y Off:It is possible to start quickly from standby mode.The features of the power save function when the unit is instandby mode are as follows.Power Save OnÚ1 OffÚ2Power consumption Approx. 0.7 W Approx. 10 WStart up time Not Quick QuickÚ3Ú1 “Unit’s Display” is fi xed to “Automatic” in the Setup menu.(➡ 90)Ú2 “Unit’s Display” is changed to “Bright” in the Setup menu.Ú3 It is possible to startup and start recording within severalseconds.– Depending on the type of TV or the connected terminal,it may take time to display the screen.After Power Save setting is complete, TV Aspect settingscreen appears.4 Press [e, r] to select the TV aspectand press [OK].16:9Pan & ScanLetterbox4:3 TVTV Aspect16:9 WIDE TVOKRETURNy 16:9:When connected to a 16:9 widescreen televisiony Pan&Scan:When connected to a 4:3 aspect television,side picture is trimmed for 16:9 picture. The“Pan&Scan” setting may not work and thepictures may be shown in the letterbox styledepending on the content.y Letterbox:When connected to a 4:3 aspect television,16:9 picture is shown in the letterbox style(➡ 119).When television picture appears, set up is complete.To stop partwayPress [RETURN ].■ To confi rm that stations have been tunedcorrectly (➡ 85, DVB Channel List)■ To restart set up (➡ 86, Auto Tuning)■ Download from TVIf this unit is connected to a Panasonic TV (VIERA) supportingHDAVI Control 3 or later via an HDMI cable, then the settinginformation on the TV is acquired by this unit when the unit isturned on for the fi rst time. Please proceed to the following steps.RETURNDownload from TVDownload in progress. Please wait.RETURN : to cancelAfter Download from TV is complete, Power Save settingscreen appears.Press [e, r] to select “On” or “Off” and press [OK].OKRETURNPower SaveOnOffOn: Minimises standby power consumption,disables Quick Start function. Unit’s Displayis set to “Automatic”.Off: Enables Quick Start function.When television picture appears, set up is complete.To stop partwayPress [RETURN ].Notey Acquisition of the setting information is not supported by allPanasonic TVs (VIERA).y The acquisition may take some time depending on the VIERAsetting information.