Panasonic Diga DMR-BW850 Operating Instructions Manual

Also see for DIGA DMR-BW850: Operating instructions

Contents

Panasonic Diga DMR-BW850 Operating Instructions Manual Manual pdf 98 page image

98RQT9433Additional connectionsConnecting a television with S VIDEOterminalsThe S VIDEO OUT terminal achieves a more vivid picture than theVIDEO OUT terminal. (Actual results depend on the television.)y Connect to terminals of the same colour.y Supplied Audio/Video cable can also be used as an alternative forAudio cable without connecting the video connector (yellow).This unit’s rear panelS VideocableAudio cableTelevision’s rear panelOUTOUTNPR P B YONENTO OUTDIGITALAUDIO OUT(PCM/BITSTREAM)S VIDEOINAUDIO INR L VIDEOINConnecting a television withCOMPONENT VIDEO terminalsOPTICALCOAXIALOUTOUTAV1 INAV1 INS VIDEOVIDEOR-AUDIO-LPR PB Y10BASE-T/100BASE-TXCOMPONENTVIDEO OUTDIGITALAUDIO OUT(PCM/BITSTREAM)R- LAUDIO INR L PR P B YCOMPONENTVIDEO INTelevision’s rear panelThis unit’s rearpanelComponentvideo cableAudio cableCOMPONENT VIDEO terminals can be used for either interlace orprogressive output (➡ 119) and provide a purer picture than the SVIDEO OUT terminal.y Connect to terminals of the same colour.y Supplied Audio/Video cable can also be used as an alternative forAudio cable without connecting the video connector (yellow).Required setting“Component Resolution” setting in the Setup menu (➡ 91)If you have a regular television (CRT: cathode ray tube)Progressive output may cause some fl ickering, even if it isprogressive compatible. Set “HDMI Video Mode” in the Setup menuto “Off” and “Component Resolution” in the Setup menu to“576i/480i” if you are concerned about it (➡ 91). This is the same formulti system televisions using PAL mode.Progressive outputDO NOTCRTCOMPONENTVIDEO OUTThis unit COMPONENTVIDEO INConnecting a stereo amplifiery Connect to terminals of the same colour.y Supplied Audio/Video cable can also be used as an alternative forAudio cable without connecting the video connector (yellow).AUDIO INR LOUTOUTAV1 INAV1 INS VIDEOVIDEOR-AUDIO-LPR PB YCOMPONENTVIDEO OUTDIGITALAUDIO OUT(PCM/BITSTREAM)Amplifier’s rear panelAudio cableThis unit’s rear panelConnecting an amplifier with a digitalinput terminalRequired setting“Digital Audio Output” in the Setup menu (➡ 89)y When this unit is connected to an amplifi er with an optical digitalaudio cable or coaxial cable and connected to a television with anHDMI cable, you can enjoy the highest quality of audio from thedisc by setting “HDMI Audio Output” to “Off” in the Setup menu(➡ 91). In this case audio is only output from the amplifier not thetelevision.y Before purchasing an optical digital audio cable (not included),check the terminal shape of the connected equipment.■ With OPTICALy You cannot use DTS Digital Surround decoders not suited to DVD.OPTICAL INOPTICALCOAXIALS VIDEOVIDEOP B Y DIGITALAUDIO OUT(PCM/BITSTREAM)Insert the cable so itsshape fi ts correctly intothe terminal.Amplifier’s rear panelOptical digital audio cableDo not bend sharply whenconnecting.This unit’s rear panel■ With COAXIALOPTICALCOAXIALS VIDEOVIDEOO-LPB Y DIGITALAUDIO OUT(PCM/BITSTREAM)COAXIAL INAmplifier’s rear panelThis unit’s rear panelCoaxial cable