Panasonic Diga DMR-EH57 Operating Instructions Manual

Also see for Diga DMR-EH57: Operating instructions Service manual

Contents

70RQT8896Changing the unit’s settings(continued)Refer to the control reference on page 66.Tabs Menus Options (Underlined items are the factory presets.)Connection(continued)AV2 Settings (Set to match the connected equipment.)≥Press [OK] to show the following settings.AV2 InputSet to “RGB/Video” or “RGB” when receiving or recordingRGB output from external equipment.≥RGB/Video ≥RGB≥Video ≥S VideoAV2 ConnectionThis setting is fixed with “Ext” if you set “TV System” to“NTSC” (➡ 72).≥Decoder:When a decoder is connected to descramble thescrambled signals (e.g., C+decoder).≥Ext: When the VCR or a digital/satellite receiver isconnected.Ext LinkThis setting cannot be made when the “TV System” is set to“NTSC” (➡ 72).≥Ext Link 1: When a digital/satellite receiver which transmits aspecial control signal recordings via the 21-pin Scartcable is connected.Start and stop timings of recording are controlled bythe control signal.≥Ext Link 2: When external equipment with a timer function isconnected.When it turns on, recording starts.When it turns off, recording stops.Others Remote Control (➡ 25) ≥DVD 1 ≥DVD 2 ≥DVD 3Clock (➡ 73)Power Save≥Refer to the following when “Power Save” is set to “On”.–“FL Display” is automatically set to “Automatic” (➡ 69).–The “Quick Start” function does not work. (It is automaticallyturned to “Off”.)–When the unit is off, Pay TV programmes cannot be watchedon the TV because the signal from the connected decoder isnot looped through. To watch them, turn on the unit.≥On: Power consumption is minimized when the unit is turned tostandby (➡ 86).≥Off:(If “Quick Start” is set to “On”, “Power Save” is automaticallyturned to “Off”.)Quick StartThe Quick Start feature enables this unit to be ready to startrecording as quick as approx. 1 second§ after turning it on. Youcan start recording soon after deciding you want to recordsomething.§Only when recording to the HDD or DVD-RAM.≥Startup takes up to a minute when:–You play a disc or start recording to discs other than DVD-RAM.–You want to make other operations.–The clock has not been set.≥On≥Off: Standby power consumption is less than when this is setto “On”.(If this is set to “On”, “Power Save” is automatically turned to“Off”.)DivX Registration≥You need this registration code to purchase and play DivX Video-on-Demand (VOD) content (➡ 41).Initialize≥Press [OK] to show the following settings.Shipping Condition ≥Yes ≥NoAll the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recordingprogrammes are also cancelled.Default Settings ≥Yes ≥NoAll the settings other than the programmed channels, time settings, country settings, language settings, disc language settings,ratings level, ratings password, remote control code, return to the factory presets.