Panasonic Diga DMR-ES10 Operating Instructions Manual

Also see for Diga DMR-ES10: Operating instructions

Contents

Panasonic Diga DMR-ES10 Operating Instructions Manual Manual pdf 21 page image

RQT800921 Playing backOperations during playStopPress [g].The stopped position is memorized.When stopped position memorized, “PLAY” flashes in the unit’s display.(Excluding when playing from the Direct Navigator and when playing a playlist.)Resume play functionPress [q] (PLAY) to restart from this position.Stopped position• If [g] is pressed several times, “PLAY” disappears and the position is cleared.• The position is cleared if the unit is turned off or the tray is opened.Pause Press [h].Press again or press [q] (PLAY) to restart play.SearchPress [t] or [y].• The speed increases up to 5 steps.• Press [q] (PLAY) to restart play.• Audio is heard during first level search forward.Audio is heard during all levels of search. (excluding moving picture parts)• Depending on the disc, searching may not be possible.Skip While playing or paused, press [u] or [i].• Each press increases the number of skips.Starting from aselected itemPress the numbered buttons.e.g., 5: [0] ➔ [5] (MP3, JPEG and TIFF discs only)5: [0] ➔ [0] ➔ [5]15: [1] ➔ [5] 15: [0] ➔ [1] ➔ [5]Selecting groupsWhile stopped (screen saver is displayed on the television ➔ right)5: [5]• This works only when stopped (screen saver is displayed on the television ➔ right) with some discs.Quick View Press and hold [q] (PLAY/x1.3).The play speed can be increased without distorting the audio.• Press again to return to normal speed.Slow-motion(Motion picture parts only)While paused, press [t] or [y].• The speed increases up to 5 steps.• Press [q] (PLAY) to restart play.• Forward direction only.• The unit will pause if slow-motion play is continued for approximately 5 minutes.Frame-by-frame(Motion picture parts only)While paused, press [w h] or [h q].• Each press shows the next frame.• Press and hold to change forward or backward in succession.• Press [q] (PLAY) to restart play.• Forward direction only.Displaying the televisionimage as a picture-in-pictureSkipping the specifiedtime (Time Slip)1 Press [TIME SLIP].2 Press [e, r] to select the time and press [ENTER].Play skips to the specified time.• Press [TIME SLIP] to show the play images in full.CM Skip Press [CM SKIP].Play restarts from approximately a minute later.Editing operations during playCHPLAYDVD-A CDCDDVD-ARAMRAM -R DVD-V-RW(V) +RDVD-A-RW(VR) VCDVCDRAM -R DVD-V-RW(V) +RDVD-A-RW(VR) VCD VCDPress [TIME SLIP].The unit displays the television image as apicture-in-picture.• You will hear the playback audio.• Press [TIME SLIP] again to cancel.• The blue background does not appear on thereceiving screen even if you select “On” for“Blue Background” in the SETUP menu(➔ page 33).• You can change the channel being received bypressing [1 2 CH].• You cannot change the channel being receivedwhile recording.Play imagesCurrently receiving imagesRAM -R -RW(VR)-RW(V) +RRAM -R -RW(VR)-RW(V) +RErase1 Press [ERASE].2 Press [w, q] to select “Erase” and press [ENTER].• A title cannot be restored once it is erased. Make certain before proceeding.• You cannot erase while recording.• The available recording space on DVD-R or +R does not increase when you erase titles.• Available recording space on a DVD-RW (DVD-Video format) increases only when the last recordedtitle is erased. It does not increase if other titles are erased.Create chapter(➔ page 26, Title/Chapter)Press [CREATE CHAPTER].Chapters are divided at the point pressed.• You cannot create chapters when the unit is in scheduled recording standby.RAM -R -RW(V) +RRAM