Panasonic Diga DMR-ES10 Operating Instructions Manual

Also see for Diga DMR-ES10: Operating instructions

Contents

Panasonic Diga DMR-ES10 Operating Instructions Manual Manual pdf 34 page image

RQT800934ConvenientfunctionsChanging the unit’s settingsPreparation• The settings remain intact even if you switch the unit to standby.• Turn on the television and select the appropriate video input to suitthe connections to this unit.• Turn the unit on.1 While stoppedPress [SETUP].2 Press [e, r] to select the tab andpress [q].3 Press [e, r] to select the menu andpress [ENTER].4 Press [e, r] to select the option andpress [ENTER].NoteThere may be differences in operation methods. If this happens,follow the on-screen instructions for the operation.In the case of a power failure, the clock setting remains in memoryfor approximately 1 minute.1 While stoppedPress [SETUP].2 Press [e, r] to select “Setup” andpress [q].3 Press [e, r] to select “ClockSettings” and press [ENTER].4 Press [e, r] to select “Set ClockAutomatically” and press [ENTER].5 Press [ENTER].Auto setting starts. This can take some time, up to a few hoursin some cases. The following screen appears when setting iscomplete.• If the time was not set correctly, use manual clock setting or timezone adjust.• DST, Daylight Saving Time, shows the summertime setting.• Time Zone shows the time difference from Greenwich Mean Time(GMT).EST (Eastern Standard Time) = GMT –5CST (Central Standard Time) = GMT –6MST (Mountain Standard Time) = GMT –7PST (Pacific Standard Time) = GMT –8AST (Alaska Standard Time) = GMT –9HST (Hawaii Standard Time) = GMT –10For other areas: xx hr6 Press [ENTER].To cancel partwayPress [RETURN].Adjust the time zone (–1 or +1) if it was not set correctly with autoclock setting.You cannot change this setting if you set the clock manually.4 Press [e, r] to select “Adjust TimeZone” and press [ENTER].5 Press [e, r] to select “–1” or “+1” andpress [ENTER].4 Press [e, r] to select “Set ClockManually” and press [ENTER].5 Press [w, q] to select the item youwant to change and press [e, r] tochange the setting.DST (Daylight Saving Time): On or OffIf you select “On”, the clock is advanced one hour starting at2 a.m. on the first Sunday in April and ending at 2 a.m. onthe last Sunday in October.Time Zone (➔ above)6 Press [ENTER].The clock starts.When you change the time zone, the recording times for titlesrecorded before the time zone was changed also change tocorrespond to the new time zone.To exit the screenPress [SETUP].To return to the previous screenPress [RETURN].Common proceduresClock settingsSet Clock AutomaticallyADD/DLTOPEN/CLOSESKIP SLOW/SEARCHREC MODE ERASERECF RecTIME SLIPFUNCTIONSDIRECT NAVIGATORTOP MENURETURNSTATUSDISPLAYSUB MENUSETUP CREATECHAPTERSCHEDULECM SKIPAUDIOCANCEL VCR Plus+RETURNe, r, w, qENTERSETUPNumberedbuttonsCableTVChannelSETUPSetupChannel CaptionsSignal Source (RF IN)Set Channels AutomaticallyPreset Channel CaptionsM l Ch l C tiTabs Menus OptionsAdjust Time ZoneSet Clock ManuallySETUPSetupDiscVideoAudioSet Clock AutomaticallyAuto Clock Setting is complete.4/4/2002 12:15 AMDST............. OnTime Zone.... CSTChannelSETUPChannelDiscVideoSetupAdjust Time Zone101SETUPDiscVideoSetupSet Clock Manually/ :/ SAT AMMonth Day Year Hour Minute1 1 12 002000DST Time ZoneOff ESTChannel