Panasonic Diga DMR-ES45 Operating Instructions Manual

Contents

Panasonic Diga DMR-ES45 Operating Instructions Manual Manual pdf 31 page image

31RQTV0141Preparation≥Select the drive with the scheduled recording you want to cancelby pressing [DRIVE SELECT].[1] When unit is onPress [∫, STOP].≥Confirmation screen appears.[2] Press [2, 1] to select “Stop Recording” andpress [ENTER].≥Recording stops and the scheduled recording is deleted. (Dailyand weekly schedules remain and scheduled recording willstart as programmed.)[1] Press [SCHEDULE].[2] Press [3, 4] to select the program and press[SUB MENU].[3] Press [3, 4] to select “Schedule set to Off” andpress [ENTER].≥Cancelled icon is displayed in left column.≥Be sure to select “Schedule set to On.” in step 3 before thescheduled time to put the program on recording standby.Note≥When a scheduled recording program cannot start (no tape, etc.),“Schedule set to On.” is cancelled one minute before the start time.(If a daily or weekly scheduled recording program cannot start, thefollowing daily or weekly scheduled recording will not be affected.)[VHS][VHS]If, at the beginning of a scheduled recording, there is not enoughtape remaining to complete the recording, the SP/EP function willautomatically run the tape at EP speed for recording. This ensuresthat the entire program will be recorded. If EP mode is not enough tostretch the remaining tape to fit the whole program you will not beable to record the whole TV program.≥It is not possible to automatically activate VP mode.≥The tape length must be set correctly. (l 65)≥Some tapes may not work correctly.≥If the recording mode changes from SP to EP during a scheduledrecording, some picture distortion occurs at that point.Even when the unit is turned off, you can display the scheduledrecording list by pressing [SCHEDULE].[1] Press [SCHEDULE].Icon explanations (A)¥: Currently recordingW: Programs are overlapped. Recording of the program with thelater start time starts when the earlier program finishesrecording.: Scheduled recording standby is cancelled. Recording will notstart at the scheduled time.n: You stopped a weekly or daily scheduled recording. The icondisappears when the next scheduled recording starts.F: The disc was full. (not enough space): The TV program may not be recorded due to copy-protect. (disc)X: Recording stopped (Dirty disc or tape, etc.)Check (B)OK: Recordable (disc)# (Date): The last day of daily or weekly recording. (disc)!: It may not be possible to record because:≥the disc is write-protected.≥there is no more space left (disc).≥the number of possible titles has reached itsmaximum.≥the tape tab is broken off.≥there is no tape/the tape is full.≥the remaining tape time is not calculated.Overlap: When the date and time overlap with another scheduledrecording, only a part of the program can be recorded.--: All other cases (tape)[2] Press [3, 4] to select the program.≥You may also select program by inputting a 2-digit numberusing the numeric buttons.e.g.: “5”: [0] )[5]“15”: [1] )[5]≥Press [2, 1] to move to the preceding or following page.[3] Press [¢, CANCEL] or [CH, ADD/DLT] to delete,≥You cannot delete programs that are currently recording.or press [ENTER] to change.≥The scheduled recording setting screen appears.[4] If you pressed [ENTER] in step 3,Use [3, 4, 2, 1] to change and press [ENTER].[5] Press [RETURN].∫ Cancel scheduled recording that hasalready begun∫ Release program from recording standby∫ Auto SP/EP modeChannelNo Date OnScheduleList DVVHRemainNew Sche01 5/ 6 Sat 6:104Scheduled recordingVideo tape (e.g.: 60-minute cassette)1st program(30 min)30 min at SP2nd program (60 min)15 minat SP45 minat EP∫ Check, change or delete programsChannelNo Date On CheckOff Drive ModeScheduleList DVDVHS 5/ 5 Fri 6:11 PMRemain 1:00 XP:New Scheduled RecordingA BScheduled Recording